Your shopping cart is empty!
MENU
Manufacturer: Proxim Wireless
The Tsunami MP-10100S is the most secure point-to-multipoint wireless system from Proxim. It is identical to the multipoint MP-10100 series but adds 256 Bit AES Encryption for military and applications, requiring the best security possible. The MP-10100S radios consist of base stations and subscriber units and deliver data rates of up to 867 Mbps. Along with encryption, the systems include Radius-based authentication, secure management through SSL/TLS1.2, SSH, and SNMPv3, and a proprietary data encapsulation scheme to improve security and video and voice performance. As a result, the MP-10100S family is the go-to choice for IT administrations seeking the most reliable and secure wireless network possible.
Advanced network management includes QoS for quad-play applications IPv4 and IPv6 stack, triple-level login, convenient web interface, and protocols for bridging, routing, and gateway functionality. The IP67-rated enclosure withstands harsh outdoor conditions and features an integrated high-gain antenna or N-type connectors for external antennas. In addition, fastConnect roaming technology supports delay-sensitive multimedia applications even when traveling at speeds up to 295 km/h (185 mph).
World Class Performance
Near-Line-of-Sight and Advanced Features
Frequency Agnostic
| Carrier-Grade Solution
Key Technologies
|
MP-10100S-BSU, Point-to-Multipoint Base Station, AES 256, 867 Mbps, MIMO 2x2, Type-N connectors
MP-10150S-BS9, Same as above, 90° sector antenna
MP-10100S-SUA, Point-to-Multipoint Subscriber Unit, AES 256, 867 Mbps, MIMO 2x2, Type-N connectors
MP-10150S-SUR, Same as above, 22 dBi panel antenna
| Technology | |
| Category | WiFi Access Point |
| Ethernet Ports | 2 Gigabit PoE ports with auto MDI-X (Port 1 with PoE input, Port 2 with PoE output) |
| Functionality | Bridging, Routing (RIP v2 and IP tunneling) |
| Network Management | |
| IP Suite | IPv4 and IPv6 simultaneously, 802.1Q: management VLAN, Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
| IP Security | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
| QoS | Advanced QoS for quad-play applications, Asymmetric UL/DL committed and maximum information rate per service flow, 802.1p priority, IPTOS, VLAN ID, IP addresses, ports, Ethernet addresses, IP protocol, and EtherType |
| Protocols | Telnet and SSH, Web GUI and SSL/TLS, TFTP, SNMPv3, SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB, Syslog, sFlow agent, SNTP and local time, spectrum analyzer |
| Wireless | |
| Frequency Range | 4.900 – 5.850 GHz (2x2 MIMO) |
| Gain | 28 dBi on model with panel antenna |
| Channels | 20, 40, and 80 MHz channels |
| Polarization | Dual polarized |
| Data Rate | Up to 866 Mbps |
| Antenna Type | Integrated 2×2 MIMO sector or panel antenna or N-Type connectors |
| Encryption Security | AES 256 |
| Wireless Security | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
| Power | |
| Power Consumption | 14 Watt typical, 17.5 Watt maximum |
| Input Voltage | 36 to 57 VDC via Power over Ethernet |
| Mechanical | |
| Dimensions | MP-10100S-BSU/SUA (250 x 220 x 72 mm); MP-10150S-BS9 (370 x 370 x 107 mm); MP-10150S-BS1/SUR (305 x 305 x 85 mm) |
| Mounting | Wall and pole mounting kit included |
| Ratings | |
| Operating Temperature | -40 to 60°C |
| Storage Temperature | -50 to 70°C |
| Certifications | IP67, FCC 90Y, 15E (UNII 15.247), IC RSS 102, RSS 111, RSS 247, RED EN 301 489-1, EN 301-489-17, EN 301 893, EN 302 502, EN 50155, EN 50121, EN 61373 (railway) |
| Safety Standards | UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22) |
| Wind Velocity Rating | 200 km/h (125 mph) |
| Download Name | File Size |
| Proxim MP-10100S Series Datasheet | 1.35MB |
| Proxim MP-10100 Install Guide | 828.95KB |
