Your shopping cart is empty!
MENU
Manufacturer: Proxim Wireless
The QB-10250 BeamX radios speed the deployment of point-to-point networks by eliminating the complicated and time-consuming antenna alignment process. Two radios come pre-configured, and with intelligent beam steering technology, installation is easy and cost-effective. The auto-alignment feature starts with a rough sighting between endpoints. Then, the units take control of the setup, as the QB-10250 radios manage and maintain the fine-tuning for optimum signal-to-noise ratio.
In urban areas with poor line-of-sight conditions, the QB-10250 and BeamX antennas find the reflection angle from a nearby wall or building to facilitate connectivity. This intelligence ensures the link remains optimized to utilize the system’s high throughput capability fully. In addition, BeamX technology combined with the secondary look-ahead scan radio improves performance even in high RF interference environments.
The QB-10250 delivers up to 866 Mbps throughput at distances of 10 miles (16 km). In addition, it includes AES 128 encryption, Radius authentication, and advanced network management such as dual IPv4 and IPv6 stack, triple-level login, advanced web interface, and rich network protocols for bridging, routing, and gateway functionality. The IP67-rated enclosure delivers years of reliable service in harsh conditions such as high winds, salt fog, and extreme temperatures.
The QB-10250 BeamX is designed for harsh environments, is fully IP67 rated, and will deliver years of reliable service in conditions that include, high winds, high salt, and high-temperature extremes.
Fast, Secure and Flexible
Proxim SmartScan™
| BeamX Antenna
Key Technologies
|
| Technology | |
| Category | WiFi Access Point |
| Ethernet Ports | 2 Gigabit PoE ports with auto MDI-X (Port 1 with PoE input, Port 2 with PoE output) |
| Functionality | Bridging, Routing (RIP v2 and IP tunneling) |
| Network Management | |
| IP Suite | IPv4 and IPv6 simultaneously, DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS, 802.1Q: management VLAN, Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
| IP Security | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
| Protocols | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3, SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB, Syslog, sFlow agent, SNTP and local time, spectrum analyzer |
| Wireless | |
| Frequency Range | 4.900 – 5.850 GHz (2x2 MIMO) |
| Gain | 16 dBi (receive) and 20 dBi (transmit) |
| Channels | 20, 40, and 80 MHz channels |
| Data Rate | 866 Mbps up to 10 miles distance |
| Antenna Type | Integrated 2×2 MIMO BeamX panel antenna |
| Encryption Security | AES 128 (AES 256 with license upgrade) |
| Power | |
| Power Consumption | 30 Watt typical, 40 Watt maximum |
| Input Voltage | 36 to 57 VDC via Power over Ethernet |
| Mechanical | |
| Dimensions | 14 x 14 x 3.40 inches (371 x 371 x 85 mm) |
| Mounting | Wall and pole mounting kit included |
| Ratings | |
| Operating Temperature | -40 to 60°C |
| Storage Temperature | -50 to 70°C |
| Certifications | IP67, FCC 90Y, 15E (UNII 15.247), IC RSS 102, RSS 111, RSS 247, RED EN 301 489-1, EN 301-489-17, EN 301 893, EN 302 502 |
| Safety Standards | IEC 62368-1:2016 & 60950-22:2016, UL 62368-1 2nd edition & 60950-22 2nd edition, CAN/CSA C22.2 No 62368-1:14 & No 60950-22:17, EN 62368-1:2014 + A11:2017 & 60950-22:2017 |
| Wind Velocity Rating | 200 km/h (125 mph) |
| Download Name | File Size |
| Proxim QB-10250 BeamX Series Datasheet | 1.07MB |
