The MP-10100S offers all the benefits of Quickbridge® 10100 family, with the enhanced security offered by the used of AES 256 encryption. This encrypted data is then encapsulated in the WORP® protocol that adds an additional layer of security. The QB-10100S delivers high bandwidth backhaul with carrier class reliability in even the toughest of conditions. It is perfectly suited for the service provider or enterprise that needs to connect critical applications and services to the data center or the world. The range of high-power, integrated and external antenna models provide the flexibility to design a backhaul link that will meet the most stringent criteria.
Designed for harsh environments, the QB-10100S is fully IP67 rated, and will deliver years of reliable service in conditions that include, high winds, high salt, and high temperature extremes.
QB-10100S-LNK, Point-to-Point Link, AES 256, 867 Mbps, MIMO 2x2, Type-N connectors
QB-10150S-LNK, Same as above, 22 dBI panel antenna
Technology | |
Category | WiFi Access Point |
Ethernet Ports | 2 Gigabit PoE ports with auto MDI-X (Port 1 with PoE input, Port 2 with PoE output) |
Functionality | Bridging, Routing (RIP v2 and IP tunneling) |
Network Management | |
IP Suite | IPv4 and IPv6 simultaneously, DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS, 802.1Q: management VLAN, Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
IP Security | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
Protocols | Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3, SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB, Syslog, sFlow agent, SNTP and local time, Spectrum analyzer |
Wireless | |
Frequency Range | 4.900 – 5.850 GHz (2x2 MIMO) |
Gain | 16 to 28 dBi peak depending on model |
Channels | 20, 40, and 80 MHz channels |
Polarization | Dual polarized |
Data Rate | Up to 400 Mbps or 866 Mbps with license |
Antenna Type | Integrated 2×2 MIMO dual polarized panel antenna |
Encryption Security | AES 128 |
Wireless Security | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
Power | |
Power Consumption | 14 Watt typical, 17.5 Watt maximum |
Input Voltage | 36 to 57 VDC via Power over Ethernet |
Mechanical | |
Dimensions | MP-100L-BSU/SUA (250 x 220 x 72 mm); MP-10150L-BS9 (370 x 370 x 107 mm); MP-10150-BS1/SUR (305 x 305 x 85 mm) |
Mounting | Wall and pole mounting kit included |
Ratings | |
Operating Temperature | -40 to 60°C |
Storage Temperature | -50 to 70°C |
Certifications | IP67, FCC 90Y, 15E (UNII 15.247), IC RSS 102, RSS 111, RSS 247, RED EN 301 489-1, EN 301-489-17, EN 301 893, EN 302 502, EN 50155, EN 50121, EN 61373 (railway) |
Safety Standards | UL 60950, CAN/CSA-C22.2 No. 60950, IEC 60950, EN 60950 (part -1 and -22) |
Wind Velocity Rating | 200 km/h (125 mph) |
Download Name | File Size |
Proxim QB-10100S Series Datasheet | 113.34KB |