Black Box EMS1G24F Emerald 26-Port 1G Fiber Network Switch, 24 SFP, 2 SFP+

Black Box EMS1G24F 26-Port, 1G Fiber Network Switch with 2 SFP+ ports, 2 combo media ports, 2 rear stacking ports
Model: EMS1G24F
Availability: Contact Westward Sales
Standard Shipping & Handling
Qty: Add to Cart

Black Box EMS1G24F 1G Fiber Network Switch, 24 SFP 1,000-Mb SFP & 2 10-GbE SFP+ Ports

To get the most out of your Emerald solution, you need to have the right networking equipment in place. The Emerald EMS1G24F Network Switch is a power-efficient and resilient Gigabit Ethernet switch designed to optimize the performance of your Emerald system. It features integrated 10-Gbe uplinks for advanced Layer 3 distribution. This switch offers a non-blocking architecture that allows it to handle unexpected traffic loads. On top of all that, the Emerald Network Switch provides performance assurance with a data rate of up to 212 Gbps and a forwarding rate of up to 158 Mbps.

This Emerald network switch is perfect for critical applications that cannot experience any downtime. Use the switch with dual internal hot-swappable 80PLUS-certified power supplies for high availability and power efficiency. It offers simple management and scalability via an 84-Gbps stacking architecture. You can manage up to 12 switches from a single IP address with ease.

The EMS1G24F switch offers the latest open-standard protocols and can interface with Cisco protocol PVST+. It also supports Dell Networking OS9, VLT, and network virtualization features.

Key Features

  • 24 SFP 1,000-Mb SFP ports
  • 2 integrated 10-GbE SFP+ ports
  • 2GbE combo media ports for copper or fiber flexibility
  • 2 dedicated rear stacking ports
  • 1 hot-swap power supply (200-W AC)
  • Dual hot-swap power supply bays (optional power supply available)

In the Box

  1. (1) Ethernet Switch
  2. (2) Power Cords, US
  3. (1) Set of Rack Rails
  4. (1) Information Sheet
  5. (1) Console Cable RJ45 to DB9F
  6. (1) Grounding Lug/Hardware
Network Management
QoSAccess Control Lists, Prefix List, Route-Map, Rate Shaping (Egress), Rate Policing (Ingress), Scheduling Algorithms, Round Robin, Weighted Round Robin, Deficit Round Robin, Strict Priority, Weighted Random Early Detect
System ConfigurationNetwork Management, SNMPv1/2, SSHv2, FTP, TFTP, SCP, Syslog, Port Mirroring, RADIUS, IEEE 802.1X, Support Assist (Phone Home), Netconf APIs, XML Schema, CLI Commit (Scratchpad), sFlow
ProtocolsMAC addresses: 80 KB, IPv4 routes, IPv6 routes, switch fabric capacity: 212 Gbps (full-duplex), forwarding capacity: 158 Mpps, link aggregation, Queues per port: 8 queues, Layer 2 VLANs, MSTP, VRF-lite, Line-rate Layer 2 and Layer 3 switching, IPv4, IPv6, Multicast table, LAG load balancing, 4 MB packet buffer memory, 1 GB CPU memory
Ratings
Operating Temperature32 to 113°F (0 to 45°C)
Storage Temperature-40 to 149°F (-40 to 65°C)
Humidity5 to 95% (RH), non-condensing
CertificationsUL/CSA/EN 60950-1 second edition, EN 55032: 2015+A1:2007 (CISPR 32), FCC CFR 47 Part 15, Subpart B:2009, Class A, EN 300 386 V1.4.1:2008 EMC for Network Equipment, EN 55024: 1998 + A1: 2001 + A2: 2003, EN 61000-3-2: Harmonic Current Emissions, EN 61000-3-3: Voltage Fluctuations and Flicker, EN 61000-4-2: ESD, EN 61000-4-3: Radiated Immunity, EN 61000-4-4: EFT, EN 61000-4-5: Surge, EN 61000-4-6: Low Frequency Conducted Immunity
Safety StandardsEN 60950-1, Second Edition, IEC 60950-1 Second Edition Including All National Deviations and Group Differences, EN 60825-1 Safety of Laser Products Part 1: Equipment Classification Requirements and User™s Guide, EN 60825-2 Safety of Laser Products Part 2: Safety of Optical Fiber Communication Systems, FDA Regulation 21 CFR 1040.10 and 1040.11
Tags: EMS1G24F