Industrial communications require equipment to operate continuously regardless of conditions. These networks demand reliability as well as security. For these situations, ensure data integrity and network protection with Antaira Technologies’ AGS-7230-AC-T-US rugged wireless router. It’s ideal for integrating surveillance cameras, machine-to-machine (M2M), and industrial internet of things (IIoT) systems.
The AGS-7230 is a versatile industrial gateway, router, and access point. It includes routing, VPN, firewall, NAT, port forwarding, DHCP server, encryption, and other robust network management protocols. Dual Wi-Fi radios, along with four LAN ports and one WAN port, offer a variety of network configurations to complement nearly any topology. It’s fully managed with routing protocols, allowing network staff to fine-tune every network setting. As an access point, it securely connects multiple wireless users and devices, allowing mobility within a confined perimeter. Built with industrial operations in mind, it also includes Modbus, RS-232 and RS-485 serial interfaces, and digital I/O for connecting field devices.
Network security is of no value if it isn’t reliable. That’s why Antaira invests in heavy-duty construction, keeping this device online and working 24 x 7. The AGS-7230 features a wide temperature range, redundant DC power inputs, protection against power and voltage surges, and DIN-rail mounting. A 5-year warranty means you can rely on this industrial-grade router and access point to last.
The AGS-7230 is an excellent value for its capacity. You not only save money on the upfront cost, but you’ll also save on network management and upkeep. Get in touch Westward Sales today to discuss your network requirements. We’ll help you outfit the right devices and accessories for your project.
|Type||WiFi Access Point|
|Firewall Features||SPI with Stealth Mode, IPS, Access Control, MAC Control|
|IEEE 802.1Q VLAN||Port-based, Tag-based|
|VPN Features||IPSec, OpenVPN, Tunneling with Full Tunnel, Tunnel Failover, Site to Site, Site to Host, Host to Site, Host to Host|
|QoS||Policy-based Bandwidth Control and Packet Flow Prioritization|
|System Configuration||Web, Telnet & SSH via the CLI, SNMP (v1/v2c/v3), Private MIB, MMI, System Info., System Time / Log, Backup & Restore, Reboot & Reset, FTP, Packet Analyzer, Diagnostic Tools, data logging|
|Protocols||Dynamic IP, Static IP, PPPoE, PPTP, L2TP, IPv6, Port Forwarding, Virtual Server / Computer, DMZ Host Pass-through via PPTP/L2TP/IPSec, Static and Dynamic routing, RIPv1/v2, OSPF, and BGP|
|Event Handling||Managing / Notifying Events, DO, SMS, Modbus, Syslog, SNMP Trap (v1/v2c), Email Alert, Remote Host, and MQTT|
|Antenna Type||4 SMA male jacks for external 5 GHz and 2.4/5 GHz Wi-Fi antennas|
|WLAN Operation Mode||Access Point, Client, Bridge, Repeater, AP Router, WDS only, WDS Hybrid Modes|
|Encryption Security||WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, 802.1x|
|LAN Ports||5 Gigabit Ethernet|
|WAN||Multiple WANs, Load Balance, Configurable Ethernet|
|USB||USB 2.0 for logging or storage|
|Serial||RS-232 or RS-485 (4-pin terminal block)|
|Wireless||2 MIMO Wi-Fi channels; 5 GHz and 2.4 / 5 GHz (selectable), IEEE 802.11a/b/g/n/ac compliant|
|Digital IO||1 digital input, 1 digital output|
|Modbus||Modbus Gateway for Modbus TCP Master/Slave, Modbus RTU/ASCII Master/Slave Access|
|Input Voltage||12 to 48 VDC, redundant|
|Enclosure||Fanless metal housing|
|Dimensions||62 x 125 x 160 mm|
|Mounting||DIN-rail and wall mounting|
|LED Indicators||Power, Fault, Wi-Fi Signal, Link, Activity|
|Operating Temperature||-30° to 70°C|
|Storage Temperature||-40 to 85°C|
|Humidity||10 to 95% non-condensing|
|EMC||EN 55024: 2010+A1; IEC 61000-3-2, -3-3, -4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -6-2; EN 55032;|