Taoglas ADFGP.50A Embedded Active GNSS Dual Stacked Patch Antenna

Taoglas ADFGP.50A  Embedded Active GNSS Dual Stacked Patch Antenna with Ground Plane
Model: ADFGP.50A.07.0100C
Availability: 2 Weeks or Less
FREE SHIPPING !
$62.07
Qty: Add to Cart

Taoglas ADFGP.50A Active Dual Patch, Dual Feed Antenna for GPS/Glonass/Galileo/BeiDou

The Taoglas ADFGP.50A is an active dual patch, dual feed antenna for GPS L1/L2/L5, Glonass, Galileo and BeiDou. It consists of two stacked patches, 50 and 40mm in width and 16.8mm thick. It has been tuned and tested on a 50 x 50mm ground plane specifically for GPS L1: 1575.42 MHz, L2: 1227.6 MHz and L5: 1176.45 MHz as well as the Glonass, Galileo and BeiDou bands. Typical applications include: UAVs and Robotics, Transportation, Agriculture, and Navigation.

Each patch element has dual feed to ensure low axial ratio and should be used in conjunction with a hybrid coupler. The antenna exhibits excellent gain and good radiation pattern stability leading to a reliable GPS fix in areas of weaker signal strength. The ADFGP.50A includes an LNA and front-end SAW filter to reduce out of band noise, such as from nearby cellular transceivers. It offers better protection from nearby radiated power surges and greatly reduces the probability of damaging your GNSS receiver from nearby transmissions.

The ADFGP.50A is connected via an IPEX MHFI connector and works well without modifications in most environments, however, it can be tuned and optimized for different ground planes and enclosures if required. It is manufactured and tested in a TS16949 first tier automotive approved facility.

Key Features

  • Embedded Dual-Pin Patch for Lowest Axial Ratio
  • Covering Bands:
    • GPS/QZSS (L1/L2)
    • GPS/QZSS/IRNSS (L5)
    • Galileo (E1/E5a/E5b)
    • GLONASS (G1/G2/G3)
    • BeiDou (B1/B2a/B2b)
  • Positional Accuracy of 76cm achievable, Positional Accuracy of 1.4cm achievable with RTK
  • Cable: 100mm long of 1.37mm coaxial*
  • Connector: I-PEX MHF® I (U.FL comp)*
  • Dimensions: 50 x 50 x 16.8 mm
  • RoHS & Reach Compliant

*For further optimization to customer-specific device environments, custom-tuned patch antennas can be supplied, subject to an MOQ. All cable lengths and connector types are customizable. Contact Westward Sales to discuss antenna configurations and modifications that meet your project needs.

Technology
TypeAntenna
Wireless
Single / SISO AntennasGPS / Iridium
PolarizationLow axial ratio (dual-pin patch)
Antenna EfficiencyPositional accuracy of 76 cm and 1.4 cm with RTK
Antenna TypeGPS/QZSS (L1/L2), GPS/QZSS/IRNSS (L5), Galileo (E1/E5a/E5b), GLONASS (G1/G2/G3), BeiDou (B1/B2a/B2b)
Mechanical
Cabling100 mm x 1.37 mm coaxial
Connector TypeI-PEX MHF I (U.FL compatible)
Dimensions50 x 50 x 16.8 mm
Ratings
RoHS CompliantRoHS and REACH compliant
Download NameFile Size
Taoglas ADFGP.50A Datasheet1.58MB