Your shopping cart is empty!
MENU
The Patton Electronics’ CopperLink CL1101E Power over Ethernet (PoE) extender devices provide power and data from a Fast Ethernet connection across an existing twisted pair(s) or coax cable run. The industrial-grade CL1101E enables Ethernet connectivity over previously installed 2-wire 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial copper cables. The solution adds new life into legacy circuits deployed for traditional non-IP applications like RS-232 and RS-485 controls, alarms, CCTV, analog phones, and intercom speakers. With a CL1101E extender pair installed, you can quickly enable wireless access points (WAPs), IP cameras, IP telephones, IP door stations, HVAC controls, LED lighting, and other powered devices (PD) with no additional overhead expenditures. With a distance up to 3,300 feet, the CL1101E kit allows IP terminal equipment to be placed where you need it.
The CL1101E requires a Local and Remote unit at each end of a cable run. The Local model is typically located near the network hub to accept Ethernet and is powered by an AC to DC power adapter. The Remote unit is usually located on the network edge away from other devices. It may be powered from the PoE line. A line interface connects the Local and Remote units, which support RJ45, BNC, or terminal block connectors. The pair includes Transparent LAN Bridging which passes higher layer industrial protocols such as tagged and untagged 802.1Q VLAN packets, BACnetIP, EtherCAT, and Modbus TCP. The bridge is also fully transparent to WMV, MPEG-4, and MJPEG video compression schemes. PoE PowerPlus technology delivers power to the remote CopperLink extender and PD connected to it. No power is required at the remote location.
CL1101E/L/P/BNC/EUI, PoE Local Extender with BNC connector, 100-240 VAC
CL1101E/L/P/RJ45/EUI , Same as above with RJ45 connector
CL1101E/R/PAFA/BNC/E, PoE Remote Extender, BNC connector, line-powered
CL1101E/R/PAFA/RJ45/E, Same as above with RJ45 connector
CL1101/PAFA/BNC/EUI-2PK, PoE Extender pair with Local and Remote units and BNC connectors, 100-240 VAC
CL1101/PAFA/RJ45/EUI-2PK, Same as above with RJ45 connectors
| Technology | |
| Category | Ethernet Extender |
| Total Ports | 2 |
| Ethernet Ports | 1 Fast Ethernet (10/100TX) |
| Protocol | Transparent LAN bridging, supports 802.1Q VLAN frames |
| Transmission Distance | 3,300 feet (1005 meters) |
| Power | |
| PoE Power Output | Up to 25.5W @ 511 meters (IEEE 802.3af compliant) |
| Power Consumption | 1.5 watts |
| Input Voltage | AC/DC power adapter included (Local unit) or PoE (Remote unit) |
| ESD Protection | FCC Part 15A, Class B, CE |
| Surge Protection | EC 61000-4-2 (ESD) 25kV (air),15kV (contact), IEC 61000-4-4 (EFT) 40A (5/50 ns) |
| Reverse Polarity Protection | Polarity sensitive |
| PoE Pin Assignment | BNC Inner + outer - |
| Mechanical | |
| Connector Type | RJ45, BNC, or terminal block (line interface) |
| Dimensions | 4.13 W x 1.5H x 3.15 D inches (105 W x 38.1 H x 95.3 D mm) |
| Weight | .78oz. |
| LED Indicators | Power, Line, (10 or 100 operation), Ethernet, and PoE |
| Ratings | |
| Operating Temperature | -10 to 70°C |
| Humidity | 10 to 95% non-condensing |
| Certifications | CE Mark |
| Safety Standards | IEC/EN60950-1, 2nd Edition, UL60950-1/CSA C22.2 No. 60950-1 |
| EMC | Directive 89/336/EEC and 73/23/EEC |
| MTBF | 83,043 hours |
| Download Name | File Size |
| Patton CL1101E User Manual | 1.77MB |
| Patton CL1101E Data Sheet | 2.63MB |
