Patton CopperLink CL1100E Industrial PoE Extender, 3,300 Feet, Twisted Pair or Coax

Patton CopperLink CL1100E Industrial PoE Extender to 3,300 feet over Twisted Pair or Coax
Model: CL1100E
Availability: IN STOCK to 4 Weeks *
Standard Shipping & Handling

Choose Options


Connectivity Options:

Module Configuration:

Accessories:


Qty: Add to Cart

Patton CopperLink CL1100E Industrial Power over Ethernet (PoE) Extender up to 3,300 Feet

The Patton Electronics’ CopperLink CL1100E Power over Ethernet (PoE) extender devices provide power and data from a Fast Ethernet connection across an existing twisted pair(s) or coax cable run. The industrial-grade CL1101E enables Ethernet connectivity over previously installed 2-wire 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial copper cables. The solution adds new life into legacy circuits deployed for traditional non-IP applications like RS-232 and RS-485 controls, alarms, CCTV, analog phones, and intercom speakers. With a CL1101E extender pair installed, you can quickly enable wireless access points (WAPs), IP cameras, IP telephones, IP door stations, HVAC controls, LED lighting, and other powered devices (PD) with no additional overhead expenditures. With a distance up to 3,300 feet, the CL1101E kit allows IP terminal equipment to be placed where you need it.

The CL1101E requires a Local and Remote unit at each end of a cable run. The Local model is typically located near the network hub to accept Ethernet and is powered by an AC to DC power adapter. The Remote unit is usually located on the network edge away from other devices. It may be powered from the PoE line. A line interface connects the Local and Remote units, which support RJ45, BNC, or terminal block connectors. The pair includes Transparent LAN Bridging which passes higher layer industrial protocols such as tagged and untagged 802.1Q VLAN packets, BACnetIP, EtherCAT, and Modbus TCP. The bridge is also fully transparent to WMV, MPEG-4, and MJPEG video compression schemes. PoE PowerPlus technology delivers power to the remote CopperLink extender and PD connected to it. No power is required at the remote location.

Key Features

  • Extends an Ethernet run to 3,300 feet (1005 meters) over twisted pair or coax
  • 2 ports – network interface and line interface
  • 1 Fast Ethernet (10/100TX) port with auto-sensing, full or half-duplex
  • Accepts 2-wire 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable
  • Choose RJ45, terminal block, or BNC connectors (line interface)
  • Local and Remote units required, one at each end of a cable run
  • Delivers PoE to the remote CopperLink extender and powered device
  • Transparent LAN bridging passes higher layer industrial Ethernet protocols
  • Plug and Play – no setup required for operation
  • Overvoltage protection on the line and Ethernet ports
  • -10 to 70°C operating temperature
  • Optional DIN-rail mounting kit (INS/A-DIN-35)

Configurations

CL1101E/L/P/BNC/EUI (CL1101E-BNC-L), PoE Local Extender with BNC connector, 100 – 240 VAC power adapter
CL1101E/L/P/RJ45/EUI (CL1101E-RJ45-L), Same as above with RJ45 connector
CL1101E/L/P/TB/TBE (CL1101E-TB-L), Same as above with a terminal block

CL1101E/R/PAFA/BNC/E (CL1101E-BNC-R), PoE Remote Extender, BNC connector, line-powered
CL1101E/R/PAFA/RJ45/E (CL1101E-RJ45-R), Same as above with RJ45 connector
CL1101E/R/PAFA/TB/TBE (CL1101E-TB-R), Same as above with a terminal block

CL1101/PAFA/BNC/EUI-2PK (CL1101-BNC-2PK), PoE Extender pair with Local and Remote units and BNC connectors
CL1101/PAFA/RJ45/EUI-2PK (CL1101-RJ45-2PK), Same as above with RJ45 connectors
CL1101/PAFA/TB/EUI-2PK (CL1101-TB-2PK), Same as above with terminal blocks

Technology
Total Ports2
TypeEthernet Extender
Ethernet Ports1 Fast Ethernet (10/100TX)
ProtocolTransparent LAN bridging, supports 802.1Q VLAN frames
Transmission Distance3,300 feet (1005 meters)
Power
PoE Power OutputUp to 25.5W @ 511 meters (IEEE 802.3af compliant)
Power Consumption1.5 watts
Input Voltage AC/DC power adapter included (Local unit) or PoE (Remote unit)
ESD ProtectionFCC Part 15A, Class B, CE
Surge ProtectionEC 61000-4-2 (ESD) 25kV (air),15kV (contact), IEC 61000-4-4 (EFT) 40A (5/50 ns)
Reverse Polarity ProtectionPolarity sensitive
PoE Pin AssignmentBNC Inner + outer -
Mechanical
Connector TypeRJ45, BNC, or terminal block (line interface)
Dimensions4.13 W x 1.5H x 3.15 D inches (105 W x 38.1 H x 95.3 D mm)
Weight.78oz.
LED IndicatorsPower, Line, (10 or 100 operation), Ethernet, and PoE
Ratings
Operating Temperature-10 to 70°C
Humidity10 to 95% non-condensing
CertificationsCE Mark
Safety StandardsIEC/EN60950-1, 2nd Edition, UL60950-1/CSA C22.2 No. 60950-1
EMCDirective 89/336/EEC and 73/23/EEC
MTBF83,043 hours
Download NameFile Size
Patton CL1101E User Manual1.77MB
Patton CL1101E Data Sheet2.63MB