Patton CopperLink CL1101E/IP67 Industrial PoE Extender, up to 3,300 feet, IP67 rated

Patton CopperLink CL1101E/IP67 Outdoor PoE Extender, IP67 rated, up to 3,300 feet
Model: CL1101E/IP67
Availability: In Stock to 4 Weeks *

Choose Options

* Module Configuration:

Qty: Add to Cart

Patton CopperLink CL1101E IP67 Power over Ethernet (PoE) Extender up to 3,300’ Distance

The Patton Electronics’ CopperLink CL1101E/IP67 Power over Ethernet (PoE) extenders supply power and data from a Fast Ethernet connection across an existing twisted pair(s) or coax cable run. The industrial-rated CL1101E/IP67 enables Ethernet connectivity over previously installed 2-wire 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cables. The solution extends the life of legacy circuits put in for traditional non-IP applications like RS-232 and RS-485 controls, alarms, CCTV, analog phones, and intercom speakers. A CL1101/IP67 paired with Local extender can quickly connect wireless access points (WAPs), IP cameras, IP telephones, access control devices, LED lighting, and other powered devices (PD) without additional overhead costs. The weatherproof enclosure with cable glands, allows PD equipment to be placed in outdoor settings.

The CL1101E/IP67 may be configured as a Local and Remote unit. Each type needs to be placed at each end of a cable run. The Local model is typically located near the network hub to accept Ethernet and is powered by an AC to DC power adapter. The Remote unit is remotely located on the network edge. It accepts power from the Line interface. A line interface, with choice of RJ45, BNC, or terminal block connections, spans up to 3,300 feet between the Local and Remote units.

A CL1100E pair includes Transparent LAN Bridging which passes higher layer industrial protocols such as tagged and untagged 802.1Q VLAN packets, BACnetIP, EtherCAT, and Modbus TCP. The bridge is also fully transparent to WMV, MPEG-4, and MJPEG video compression schemes. PoE PowerPlus technology delivers power to the remote CopperLink extender and PD connected to it. No external power source is required at the remote location.

Key Features

  • Extend PoE over twisted pair or coax to distances of 3,300 feet (1005 meters)
  • 2 ports – network interface and line interface
  • 1 Fast Ethernet (10/100TX) port with auto-sensing, full or half-duplex
  • Accepts 2-wire 24-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable
  • Choose RJ45, terminal block, or BNC connections (line interface)
  • Local and Remote units required, one at each end of a cable run
  • Local unit delivers power to the Remote CopperLink extender and powered device
  • Transparent LAN bridging passes high layer industrial Ethernet protocols
  • Plug-and-play operation
  • Overvoltage protection on the line and Ethernet ports
  • -10 to 70°C operating temperature
  • IP67 enclosure with cable glands


CL1101E/IP67/L/3CG/EUI (CL1101/IP67-L), Outdoor Local PoE extender, IP67 rated with AC to DC adapter
​CL1101E/IP67/R/PAFA/3CG/E (CL1101/IP67-R), Same as above but Remote PoE extender, line-powered

CategoryEthernet Extender
Total Ports2
Ethernet Ports1 Fast Ethernet (10/100TX)
ProtocolTransparent LAN bridging, supports 802.1Q VLAN frames
Transmission Distance3,300 feet (1005 meters)
PoE Power OutputUp to 25.5W @ 484 meters (IEEE 802.3af compliant)
Power Consumption1.5 watts
Input VoltageAC to 54 VDC power adapter (Local unit) or line powered (Remote unit)
ESD ProtectionFCC Part 15A, Class B, CE Mark, EMC Directive 89/336/EEC, LVD Directive 73/23/EEC
Reverse Polarity ProtectionPolarity Sensitive
Overload ProtectionIEC 61000-4-2 (ESD) 25kV (air), 15kV (contact), IEC 61000-4-4 (EFT) 40A (5/50ns), IEC 61000-4-5 (lightning) 25A (8/20 μs)
PoE Pin Assignment2wire: pin 3+ pin 6-, 4wire: 802.3i/802.3u, 8wire: 802.3ab/802.3an
EnclosureNEMA 4X rated with 3 cable glands
Dimensions5.15 W x 5.15 H x 2.43 D inches (130.8 W x 130.8 H x 61.7 D mm)
Weight1.1 lbs
LED IndicatorsPower, Line, (10 or 100 operation), Ethernet, and PoE
Operating Temperature-10 to 70°C
Humidity10 to 95% (non-condensing)
CertificationsCE Mark
Safety StandardsIEC/EN60950-1, 2nd Edition, UL60950-1/CSA C22.2 No. 60950-1
EMCDirective 89/336/EEC and 73/23/EEC
MTBF83,043 hours