Your shopping cart is empty!
MENU
***DISCONTINUED*** This router is discontinued. It has been replaced by the RUT956.
Industrial networking presents challenges that don’t show up in other networking applications. Networks can span miles. Operating conditions can be physically hard on the equipment, and security demands are through the roof. Satisfying all of these needs is rarely cheap and easy, but the Teltonika RUT955 makes a strong case to be your go-to router.
This 4G/LTE and Wi-Fi cellular router takes reliability to a new level. The dual SIM design automatically switches between cards when a weak signal is detected, and it has a switching algorithm that helps reduce roaming costs. GNSS positioning provides GPS location capabilities and even supports geofencing. With multiple inputs and outputs designed specifically for remote monitoring, you can ensure that this router is performing to your expectations What is particularly promising about the RUT955 is security. It supports OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, and SSTP for secure connections. Industry standards for Wi-Fi and LTE security are vigorously met. It comes with built-in DDOS prevention, VLAN separation, and flexible access control. While this router is managing your industrial network, you can trust that it provides every opportunity to protect your data.
On top of all of that, it’s also rugged. It operates flawlessly in extreme temperatures that range from far below freezing to far above the hottest natural temperatures on earth. It features surge protection and a DIN-rail mount so it’s safe from industrial hazards. This single device gives you powerful networking, industrial-grade security, and durable performance in a single, affordable package.
Enable your RUT955 with a cost-effective monthly data plan to ensure your router is ready to deploy. Select Verizon or AT&T and the data plan size from 100 MB to 5 GB. You are billed monthly; there’s no long-term contract. Plus, manage all of your fielded gateways from a single cloud-based web portal.
Purchase a SIM card from this page. It will be mailed to you in 2 to 3 business days. Then after you receive your card, sign up for a data plan at Westward Connect.
The RUT955 includes two magnetic mount LTE antennas, two magnetic mount WiFi antennas, and one adhesive mount GNSS antenna. For mobile and industrial applications, consider these high-performance antennas listed on these pages:
2-in-1 (MIMO LTE) combo antennas
3-in-1 (MIMO LTE and WiFi) combo antennas
4-in-1 (MIMO LTE and MIMO WiFi) combo antennas
5-in-1 (MIMO LTE, MIMO WiFi, and GPS) combo antennas
The RUT955 is a competitive cellular router, but it’s worthless without the rest of the network. All of your equipment must perform at this level and be economical, too. It’s possible to marry quality with affordability but finding the perfect device for every function can cost you a lot of time. With a single conversation, one of our experts can get to know your needs and help select the hardware you need to thrive.
| Technology | |
| Category | Cellular Router |
| Ethernet Ports | 4 Fast Ethernet (10/100TX) |
| Industrial Protocols | MODBUS TCP master / slave |
| Computing | |
| CPU | Atheros Wasp, MIPS 74Kc, 550 MHz |
| System Memory Configuration | 16 MBytes Flash, 128 MBytes DDR2 RAM |
| Operating Systems | RutOS (OpenWrt based Linux OS) with Busybox shell, Lua, C, C++ support and provided SDK package with build environment |
| Cellular Interface | |
| Carrier | AT&T, T-Mobile, and Verizon |
| SIM Holder | 2 cards with auto-switch when weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail |
| Networks | 4G (LTE) CAT 4 DL up to 150 Mbps, UL up to 50 Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS |
| Network Management | |
| Firewall Features | Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
| Authentication | Pre-shared key, digital certificates, X.509 certificates |
| IP Suite | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL) |
| VPN Features | IPsec (IKEv1, IKEv2, 4 x VPN IPsec tunnels with 5 encryption methods - DES, 3DES, AES128, AES192, AES256), L2TP, PPTP, GRE, OpenVPN (multiple clients and server can be running simultaneously, 12 encryption methods), Stunnel, SSTP |
| QoS | Traffic priority queuing by source/destination, service, protocol or port, WMM, IEEE 802.11e |
| System Configuration | WEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMS |
| Protocols | NAT, Static/Dynamic routing, Firewall, OpenVPN, IPsec, H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets, VLAN, Load balancing, Mobile quota control, WEB Filter, Network Backup, Auto Failover |
| Reliability | Ping Reboot, Periodic Reboot, Wget Reboot, LCP and ICMP for link inspection, automatic switching to Wi-Fi for backup connection |
| Wireless | |
| VSWR | <3 for LTE and <2 for WiFi |
| Antenna Type | 3 dBi for LTE and 5 dBi for WiFi, omnidirectional |
| WLAN Operation Mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
| Wireless Security | WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter, PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation |
| Transmit Power | 33 dBm for GSM, 24 dBm for WCDMA, 23 dBm for LTE, and 20 dBm for WiFi |
| Interfaces | |
| LAN Ports | 1 WAN and 3 LAN |
| USB | 1 USB2.0 port |
| Serial | RS-232 and RS-485 |
| Wireless | IEEE 802.11b/g/n, up to 100 simultaneous connections |
| GPS | GPS, GLONASS, BeiDou, Galileo and QZSS, NMEA 0183, GNSS coordinates via WebUI, SMS, TAVL, RMS; TAVL and RMS software support, configurable multiple geofence zones, location tracking |
| Digital IO | 2 digital outputs, SPST relay output, and 3 digital inputs |
| Analog Inputs | 1 analog input (0 - 24 V) |
| Power | |
| PoE Power Output | Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port (NOT compatible with IEEE802.3af and 802.3at) |
| Power Consumption | < 2 W idle, < 7 W maximum |
| Connection | 4-pin terminal block |
| Input Voltage | 9 to 30 VDC |
| Mechanical | |
| Connector Type | 2 SMA for LTE, 2 RP-SMA for WiFi |
| Enclosure | Aluminum with plastic panels, fanless cooling |
| Dimensions | 50 x 100 x 110 mm (H x W x D) |
| Weight | 287 g |
| Mounting | Wall mount or DIN-rail |
| Shock / Vibration | Class guideline-DNVGL-CG-0339:2016, EN 60068-2-6:2008 |
| LED Indicators | connection type status, signal strength, LAN status, and power |
| Ratings | |
| Operating Temperature | -40° to 75°C |
| Humidity | 10 to 90% non-condensing |
| Certifications | CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance |
| Safety Standards | S/NZS 60950.1:2015, EN 50665:2017, EN 62311:2008, FCC 47 CFR Part 1 1.1310, RSS-102 Issue 5 (2015) |
| EMC | EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, and EN61000-4-11, Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0, FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014) |
| MTBF | 270,000 hours |
| RF Standards | EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1, EN 303 413 V1.1.0, AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017, FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017), RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1 |
| Warranty | 2 years |
| Download Name | File Size |
| RUT955 Manuals (WebUI links) | 103.88KB |
| RUT955 Certifications (WebUI links) | 123.4KB |
| Teltonika RUT955 Datasheet | 1.57MB |
| Teltonika RUT955 Quick Start Guide | 268.59KB |
AM-7-27-24-58-300x300.png)
