Patton CopperLink 2110/P Power over Ethernet (PoE) Extender (10/100 Mbps)

Patton CopperLink 2110/P 10/100 Mbps Power over Ethernet Booster
Model: 2110/P
Availability: In Stock to 4 Weeks *
FREE SHIPPING !
Qty: Add to Cart

Patton CopperLink 2110/P Power over Ethernet (PoE) Extender for Fast Ethernet Lines

The CopperLink Model 2110/P from Patton Electronics doubles the maximum distance of a Power over Ethernet (PoE) run from 328 feet (100 meters) to 656 (200 meters). Up to four 2110/P Ethernet boosters may be placed in-line to further extend the distance to 1,640 ft (500 meters). It forwards power and data to the connected PoE device. The 2110/P eliminates the need for additional switches, hubs, wireless access points, and expensive fiber installations. The extender operates on any standard Fast Ethernet network and is entirely transparent to the PoE protocol, making it truly plug-and-play. It will not cause latency or degradation on your network connections, ensuring the maximum 100 Mbps full-duplex line rate.

The PoE capability powers the extender and peripheral device over a standard twisted-pair Ethernet cable. The Model 2110/P is ideal for extending the reach of Powered Devices (PD) such as wireless access points, IP cameras, and VoIP phones.

Key Features

  • 2 Fast Ethernet ports (10/100Base-TX) with auto-negotiating MDI-X
  • IEEE 802.3af compliant (30 watts pass-through)
  • Flow Control (IEEE 803.X) for full-duplex operation
  • Supports backpressure for half-duplex operation
  • Store and forward
  • LED Status Indicators
  • 57 VDC
  • Operating Temperature 32 to 122°F (0 to 50°C)
Model 2110/P: PoE Pass Through & Ethernet Extension
Technology
CategoryEthernet Extender
Total Ports2
Ethernet Ports2 Fast Ethernet (10/100TX), PoE+, RJ45, auto negotiation and MDI-X
Power
PoE Power Output6.5W @ 300 meters
Input Voltage12 VDC, 200 ma
ESD ProtectionFCC Part 15, Class A, CE
PoE Pin AssignmentInject power on the data pair pins 1/ 2 (POE+) and 3/ 6 (POE-) of the connector labeled PoE OUT. The 2110/P accepts POE power on either pin pairs 1/ 2 and 3/ 4, or 4/ 5 and 7/ 8 on the connector labeled PoE IN.
Mechanical
MountingOptional 2U rackmount panel (1001MP16)
LED IndicatorsPower, PoE, Ethernet link activity
Ratings
Operating Temperature0 - 50°C
HumidityUp to 90% non-condensing
Safety StandardsIEC/EN 60950-1
Download NameFile Size
Patton 2110 User Manual333.04KB
Patton 2110 Datasheet192.18KB
Tags: 2110, 2110-P