Cradlepoint RX30-POE Managed Accessory Dock for the R1900 Router

Cradlepoint MB-RX30-POE Managed Accessory Base for the R1900 Router
Model: RX30-POE
Availability: IN STOCK
Qty: Add to Cart

Cradlepoint RX30-POE Managed Accessory Dock Adds 4 PoE Ports to the R1900 Router

The Cradlepoint RX30-POE managed accessory dock mounts to the R1900 5G cellular router to provide four (4) additional Gigabit PoE ports. It’s a perfect way to connect Power over Ethernet (PoE) devices to the R1900. The RX30 is rugged and suited for mobile and industrial environments where temperature extremes, irregular power, shock, and vibration are common. The 6-pin GPIO and power cable, included in the box, supplies power to both the RX30 managed accessory and the R1900 router attached to it.

Connecting the RX30 and R1900 is straightforward. Align the port to the receiver on the RX30 and set the R1900 on top of it. The RX30 receiver is keyed and will align with the port in only one direction. Reposition the R1900 until the two devices sit flush against each other. Secure the devices with the M3 screws, which go into the middle holes on the front and rear.

Key Features of the RX30

  • Add a 4-port Gigabit PoE switch to the R1900
  • Complaint to IEEE 802.3bt
  • Power budget of 60 watts
  • 6-pin (2×3) power connector
  • GPIO and power cable (170858-000), accessories kit, and mounting template are included.
LAN Ports4 Gigabit PoE ports (IEEE 802.3bt compliant), 60 W each
Power Consumption21 W typical, 23 W maximum, 14 W Idle (at 12 V input) with R1900 installed
ConnectionExternal 6-pin (2x3) Molex Micro-fit connector
Input Voltage9 to 36 VDC
Reverse Polarity ProtectionReverse polarity and transient voltage protection
Dimensions6.81 x 5.98 x 1.18 in (173 x 152 x 30 mm)
Weight1.85 lbs.
Operating Temperature-30 to 70°C (-22 to 158°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Humidity10% to 90%
CertificationsISO 7637-2
Download NameFile Size
Cradlepoint RX30 Datasheet4.28MB