Building structures, obstacles, and remote locations can severely reduce your cellular signal. The Cel-Fi GO-X, an all-in-one smart cellular LTE signal booster, is the best solution for tackling poor cellular coverage. It eliminates dropped calls, intermittent audio, slow streaming, and unsent texts. With an industry-leading 100 dB gain in areas up to 15,000 square feet, the Cel-Fi GO-X booster kit is ideal for buildings and outdoor spaces. The GO-X booster captures cellular signals from a directional donor antenna mounted outside and pointed at the cell tower. The GO-X amplifies the signal from the donor antenna and rebroadcasts it through the server antenna.
The GO kit may be installed indoors or outdoors. This bundle is paired with a high-gain Yagi antenna (donor) and an omnidirectional dome antenna (server). Additional server antennas like the A52-V32 panel antenna are available for venues with more floors or dense interior walls. For areas that suffer from an extremely weak outdoor signal, a high gain Cel-Fi LPDA antenna is available.
The GO-X Signal Booster is an Ideal Solution for
This cellular booster kit includes every component you need to outfit your building or outdoor space with superior voice and data performance. The kit includes the GO-X signal booster, a high-performance donor antenna, server antenna, two 30-foot cables, and an AC/DC power adapter.
Cel-Fi GO-X Cellular Booster
Cel-Fi A32-V32-101 Mobile Donor Antenna
A11-V43-121 Mobile Server Antenna
RF Cables from GO-X to Antennas
Cel-Fi WAVE is a cell phone app and cloud-based platform designed for end-users and installers for activating, setting-up, monitoring, and managing the Cel-Fi GO. The app connects to the device via Bluetooth and is available on smartphones and tablets. It’s available on iOS, Android, Tencent, PC, and Mac devices.
Register (when required):
Cel-Fi signal boosters are the only cellular coverage solution authorized for use in nearly 100 countries by nearly 200 mobile operators. The Cel-Fi mobile bundle is compatible with all cellular phones and smart devices. The system supports multiple users and multiple carriers. It’s approved for use on all major mobile carriers in the USA like AT&T, Verizon, T-Mobile, Sprint, and US Cellular. The Cel-Fi GO vehicle operates only on your carrier’s bands and doesn’t create interference with nearby wireless devices. Although the GO supports multiple carriers, the system will only operate with one carrier at a time. Use the Cel-Fi WAVE app to set the GO to your carrier. If you switch to another mobile carrier, you may change the carrier anytime using the WAVE app.
The steps below have been simplified. Before you begin, please download and read the Quick Start Guide under the Documents tab. Installation instructions start on page 4. The directional donor antenna is installed outdoors and pointed to the cellular tower. The server antenna and GO are mounted inside the building.
G32-2/4/5/12/13X-WS1, GO-X stationary bundle with GO-X booster, Yagi and dome antennas, two 30-foot RF cables, and power adapter
G32-2/4/5/12/13X-WS1-PN, same as above with panel antenna instead of dome
G32-2/4/5/12/13X-WS1-LD, same as above with LPDA antenna instead of Yagi
G32-2/4/5/12/13X-WS1-PN-LD, same as above with panel and LPDA antennas
Westward Sales is a certified reseller for Cel-Fi's line of cellular boosters and antennas.
|LTE Frequency||Bands 2, 4, 5, 12,13|
|Carrier||AT&T, Verizon, Sprint, T-Mobile, US Celluar, CGI Alaska|
|Antenna||Donor and server included with kit|
|Power Consumption||16 watts nominal|
|Input Voltage||9.6 - 16.5 VDC (AC/DC power adapter included)|
|Cabling||Included with kit|
|Dimensions||272.5 x 96.5 x 43.5 mm (GO-X)|
|Operating Temperature||0° to 65°C|
|Humidity||0% to 95%, noncondensing|
|Certifications||NEMA 4, CE, ISED, FCC Parts: 15, 20, 22, 24, 27; Bluetooth BQB|