Antaira LNP-0501-M (-24 -T) 5-Port Unmanaged PoE Switch with 1 Multi-Mode Port

Antaira LNP-0501 5-Port PoE+ Unmanaged Switch with one 100Fx Fiber Port
Model: LNP-0501-M
Availability: 1 In Stock
FREE SHIPPING !

Choose Options


* Voltage Input, Operating Temperature, Fiber Connectors:

Qty: Add to Cart

Antiara LNP-0501-M 5-Port Industrial Unmanaged Ethernet Switch, 4 PoE+ Ports and 1 Fiber Port

Antaira Technologies’ line of Ethernet switches is the preferred choice among control engineers and networking specialists. With four PoE ports plus a 2km multi-mode fiber port, the LNP-0501-M is no exception. It was designed to power PoE devices found in demanding applications like factory automation, railway, energy, surveillance and utility plants.

The LNP-0501 offers 4 Power over Ethernet (PoE+) ports of Fast Ethernet (10/100TX) speed plus a 5th fiber optic (10/100FX) port. The four PoE ports meet the IEEE802.3af/at specification to supply 30 watts per port to PoE devices like IP cameras and wireless bridges and access points. The single fiber port may be configured with SC or ST connectors.

The LNP-0501-M series was designed for outdoor and harsh industrial environments and operates in two wide operating temperature ranges -- standard and extended. The enclosure is IP30 rated and ready to mount to any control cabinet DIN-rail. The power input is protected against unregulated voltage surges. It supports power input redundancy with reverse polarity protection. In the event of a failure, a built-in relay can signal an alarm.

Key Features

  • 5 Fast Ethernet (10/100TX) total ports
  • 4 PoE+ ports comply to IEEE 802.3at/af, 30 watts / port, RJ45 with auto MDI/MDI-X
  • 1 multi-mode fiber optic port (10/100FX), 2km transmission distance
  • Select ST or SC connectors
  • Network broadcast storm protection, Store-and-Forward, 2K MAC addresses
  • Redundant power input with reverse polarity, surge and overcurrent protection
  • Select 48 – 55 VDC input or 12 - 36 VDC input
  • Aluminum IP30 case with DIN-rail and wall mount brackets
  • Relay output for alarming and fault notification
  • Choose standard (-10° to 70°C) or extended (-40° to 75°C) operating temperature
  • DC power cable, documentation and mounting brackets included with purchase
  • Class 1, Division 2 certified
  • Antaira 5 year warranty

Configurations

LNP-0501-M,  SC connector, Multi-Mode, standard operating temperature, redundant 48 - 55 VDC input, 30 x 142 x 99 mm
LNP-0501-M-T,  SC connector, Multi-Mode, extended operating temperature, redundant 48 - 55 VDC input, 30 x 142 x 99 mm
LNP-0501-ST-M,  ST connector, Multi-Mode, standard operating temperature, redundant 48 - 55 VDC input, 30 x 142 x 99 mm
LNP-0501-ST-M-T,  ST connector, Multi-Mode, extended operating temperature, redundant 48 - 55 VDC input, 30 x 142 x 99 mm
LNP-0501-M-24,     SC connector, Multi-Mode, standard operating temperature, redundant 12 - 36 VDC input, 46 x 142 x 99 mm
LNP-0501-M-24-T,    SC connector, Multi-Mode, extended operating temperature, redundant 12 - 36 VDC input, 46 x 142 x 99 mm
LNP-0501-ST-M-24,   ST connector, Multi-Mode, standard operating temperature, redundant 12 - 36 VDC input, 46 x 142 x 99 mm
LNP-0501-ST-M-24-T, ST connector, Multi-Mode, extended operating temperature, redundant 12 - 36 VDC input, 46 x 142 x 99 mm

Technology
Category Ethernet Switch (PoE)
Total Ports 5
Ethernet Ports 4 Fast Ethernet (10/100TX) PoE/PoE+, Auto MDI / MDI-X
Fiber Ports 1 Multi-Mode 2 km, (SC or ST)
Processing Type Store and Forward
Standards IEEE 802.3, 802.3u, 802.3x, 802.3at
Protocol CSMA/CD
Transfer Rate 14,880pps for Ethernet Port, 148,800pps for Fast Ethernet Port
Wavelength 1310 nm
MAC Table Size 2 kB
Power
PoE Power Output Maximum 30 watts per PoE port
Power Consumption 110 W at 48 VDC; 130 W at 51~55 VDC
Connection 1 removable 6-pin terminal block
Input Voltage 48 to 55 VDC, Redundant | 12 to 36 VDC, Redundant
EFT Protection 2,000 VDC for Power Line
ESD Protection 6,000 VDC for Ethernet
Reverse Polarity Protection Yes
Overload Protection Yes
PoE Pin Assignment Output Pin: 1,2 (V+), 3,6 (V-)
Mechanical
Enclosure Metal, IP30 Protection
Mounting DIN-rail or wall mount
Weight 1.1 lbs. or 1.6 lbs. (24V option)
Dimensions 30 x 142 x 99 mm | 46 x 142 x 99 mm (24V option)
Ratings
Operating Temperature Standard: -10 to 70°C or Extended: -40 to 75°C
Storage Temperature -40 to 85°C
Humidity 5 to 95% non-condensing
RoHS Compliant Yes
Certifications FCC, CE, UL 508, UL Class 1 Division 2, ISA 12.12.01
Warranty 5 Years