The LEP-301M-KIT from Antaira Technologies is a cost-effective way to extend an Ethernet run beyond the 100-meter limitation. Using near-end (LEP-301M-TX) and far-end (LEP-301M-RX) transceivers, the units lengthen the transmission distance over a twisted-pair line to 1000 meters (1 km). The LEP-301M-KIT supports Power over Ethernet (PoE) to deliver data and 25.5-watts of power to a device at the remote end. IP-based devices such as surveillance cameras, Wi-Fi access points, alarms, gate controllers, digital signage, and sensors can benefit from this technology.
The kit is fully compliant with IEEE 802.3, 802.3u, 802.3af/at standards. LEDs and a 7-segment display located on the top, front, and rear panels monitor operational status, PoE power level, and diagnostics. A convenient four-position DIP switch controls the Ethernet port mode. The transceivers are powered from the PoE input port or a separate DC power supply connected to the terminal blocks. The kit includes DIN-rail and wall mounting brackets.
The LEP-301M-KIT (sold as a pair of transceivers) provides ten times the distance over a standard Ethernet line. It allows you to locate remote PoE and PD enabled devices where you want them. To make the most of your existing wiring infrastructure, integrate extender technology to enable more ways to layout your network. Don't be surprised if it lowers your installation costs, too.
|Ethernet Ports||Fast Ethernet (10/100TX)|
|Standards||IEEE 802.3, 802.3u, 802.3af/at|
|PoE Power Output||30 Watts (PoE+)|
|Power Consumption||2.5 watts|
|Connection||2-pin removable terminal block|
|Input Voltage||54 to 57 VDC or PoE|
|Dimensions||60 x 120 x 32 mm|
|Mounting||DIN-rail or wall mount|
|Shock / Vibration||IEC 60068-2-6, -27, -32|
|LED Indicators||Link/activity, speed, status, warning, error, plus 7-segment digital display|
|Operating Temperature||0 to 60°C|
|Storage Temperature||-20 to 60°C|
|Humidity||5 to 90% non-condensing|
|Certifications||FCC Part 15 Class A, CE|