The LIE1014A switch has eight 10/10/1000-Mbps PoE/PoE+ copper ports and four SFP ports for uplinks. This way you can power distant access points, security cameras, and other industrial equipment over the copper Ethernet lines at the far edges of your network where it's impractical to run electrical wires. The SFP fiber uplinks give you almost unlimited fiber distance options, depending on the SFP.
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. And you'll eliminate the need to send IT technicians on site-thus lowering costs. The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications. The LIE1014A switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.
The LIE1014A gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol. It offers a 20 millisecond or less failover. It features redundant power inputs and includes DIN-rail and panel-mount kits. The power supplies (MDR-40-48 and SDR-240-48) are sold separately. The switch also includes a serial cable (RJ-45/DB9) for the console connection.
Encased in an IP30-rated metal case, this switch withstands extreme temperatures from -40°C to +75°C (-40° F to +167° F).
Technology | |
Category | Ethernet Switch |
Total Ports | 12 |
Ethernet Ports | 8 Gigabit PoE+ |
Fiber Ports | 4 SFP slots |
Processing Type | Store and forward; L2 wire-speed, non-blocking switching engine |
Functionality | IEEE 802.3x full-duplex, Back-pressure half-duplex |
Jumbo Frame Support | 9 Kbytes |
MAC Table Size | 8 Kbytes |
Network Management | |
Network Redundancy | IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
VLAN (IEEE 802.1Q) | IEEE 802.3x (Full Duplex) and Back-Pressure(Half Duplex) flow control; 256 Port-based VLANs; IEEE 802.1Q tag-based VLANs; IEEE 802.1ad Double Tagging (Q in Q) |
IGMP Snooping / GMRP | IGMP v1, v2 with up to 255 multicast groups; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering |
IP Security | IP and MAC-based access control; IEEE 802.1X authentication Network Access Control; Multicast/Broadcast/Flooding Storm Control |
QoS | 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping traffic |
Protocols | Port-based shaping, NTP and SNTP, DHCP (Client, Server, Relay, Snooping, Option 82), RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB, Static trunk or Dynamic via LACP (Link Aggregation Control Protocol) |
Reliability | Link loss recovery < 20 ms, single and multiple rings supported |
Monitoring & Event Handling | Device and Ethernet port status |
Interfaces | |
Power over Ethernet (PoE) | Scheduling; power control; PoE PD power consumption |
Power | |
PoE Power Output | 240 W total power consumption |
Rated Power | Redundant 46 to 57 VDC inputs via terminal block |
Power Consumption | 15 W without PoE draw |
Reverse Polarity Protection | Yes |
Ratings | |
Operating Temperature | -40 to 167° F (-40 to 75° C) |
Storage Temperature | -40 to 185°F (-40 to 85° C) |
Humidity | 5 to 95%, non-condensing |
Download Name | File Size |
Black Box Industrial Gigabit Switches Datasheet | 1.39MB |
Black Box Command Line Interface Guide | 470.42KB |
Black Box Industrial Ethernet Switches User Manual | 20.15MB |