Your shopping cart is empty!
MENU
The LIG1082A switch has six 10/10/1000-Mbps RJ-45 copper ports that are autosensing. It offers full wire-speed forwarding rates, auto-negotiates for network speeds, and Auto-MDI/MDI-X, eliminating the need for crossover cables. The two 100/1000 Ethernet SFP slots give you networking flexibility and scalability. You can extend your network over multimode or single-mode fiber at distances up to 80 kilometers, depending on the SFP you choose. Black Box SFPs are recommended.
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. You'll also eliminate the need to send IT technicians on site - thus lowering costs.
The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications. The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.
For redundancy, the LIG1082A has two DC power inputs. If one power source fails, the switch automatically falls over to the second power source. It offers a 20 millisecond or less failover. In addition, an alarm will alert you in case of a power failure. The switch also gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol.
This switch features redundant power inputs and includes DIN-rail and panel-mount kits. The power supplies (MDR-40-12, MDR-40-24, MDR-40-48, and SDR-240-48) are sold separately. The switch also includes a serial cable (RJ-45/DB9) for the console connection.
Key Features
| Extreme Applications
|
| Technology | |
| Category | Ethernet Switch |
| Total Ports | 8 |
| Ethernet Ports | 6 Gigabit (10/100/1000 Mbps) |
| Fiber Ports | 2 SFP slots |
| Standards | IEEE 802.3x full-duplex, back-pressure half-duplex |
| Jumbo Frame Support | 9 KB |
| Network Management | |
| Network Redundancy | Single and multiple rings supported, IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s, link loss recovery < 20 ms |
| VLAN (IEEE 802.1Q) | IEEE 802.1Q tag-based; IEEE 802.1ad Double Tagging; IGMP v1, v2; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering; IEEE 802.1ab Link Layer Discovery Protocol (LLDP) |
| IGMP Snooping / GMRP | IGMP v1, v2 with up to 255 multicast groups; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering |
| IP Security | Port security: IP and MAC-based access control, IEEE 802.1X authentication Network Access Control; Management Security: HTTPs, SSH Radius Client for Management |
| QoS | IEEE 802.1p, 4 queues per port, scheduling schemes SPQ, WRR |
| Protocols | CLI, WEB-based Management; SNMP v1, v2c, v3; Telnet (5 sessions); HTTPs, SSH; Radius Client for Management; TFTP/FTP for Configuration Import/Export; TFTP/FTP for Firmware Upgrade; Syslog; RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB; DHCP; NTP/SNTP, Static trunk or Dynamic via LACP (Link Aggregation Control Protocol) |
| Power | |
| Power Consumption | 14 watts |
| Mechanical | |
| Enclosure | Metal |
| Mounting | DIN-rail, wallmount |
| Ratings | |
| Operating Temperature | -40 to 167° F (-40 to 75° C) |
| Storage Temperature | -40 to 185° F (-40 to 85° C) |
| Humidity | 5 to 95%, non-condensing |
| Certifications | CCE; RoHS/WEEE, EN61000-6-2, EN61000-6-4 |
| Download Name | File Size |
| Black Box Industrial Gigabit Switches Datasheet | 1.39MB |
| Black Box Command Line Interface Guide | 470.42KB |
| Black Box Industrial Ethernet Switches User Manual | 20.15MB |
| LIE1080A Manual.pdf | 11.64MB |
| LIG1080A Quick Start Guide.pdf | 279.44KB |
