Your shopping cart is empty!
MENU
The LIE1082A switch has four Gigabit RJ-45 PoE/PoE+ copper ports and 2 Gigabit copper ports. This way you can power distant access points, security cameras, building access devices, and industrial equipment in harsh environments where it's impractical to run electrical wires. The switch features full wire-speed forwarding rates, auto-negotiates for network speeds, and Auto-MDI/MDI-X, eliminating the need for crossover cables.
The switch also has two Ethernet SFP slots for network flexibility and scalability. You can extend your network over multimode or single-mode fiber at distances up to 80 km, depending on the SFP you choose.
Encased in an IP30-rated metal case, this switch withstands extreme temperatures from -40°C to +75°C (-40° F to +167° F).
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. You'll also eliminate the need to send IT technicians on site - thus lowering costs. The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications.
The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.
For redundancy, the switch has two DC power inputs. If one power source fails, the switch automatically falls over to the second power source. It offers a 20 millisecond or less failover. In addition, an alarm will alert you in case of a power failure. The switch also gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol.
The LIE1082A features redundant power inputs and includes DIN-rail and panel-mount kits. The power supplies (MDR-40-12, MDR-40-24, MDR-40-48, and SDR-120-48) are sold separately and will determine the amount of watts available for PoE operation. The switch also includes a serial cable (RJ-45/DB9) for the console connection.
Key Features
| Extreme Applications
|
| Technology | |
| Category | Ethernet Switch |
| Total Ports | 8 |
| Ethernet Ports | 4 Gigabit PoE | 2 Gigabit |
| Fiber Ports | 2 SFP slots |
| Processing Type | Store and forward; L2 wire-speed, non-blocking switching engine |
| Standards | CE, RoHS, WEEE, EN61000-6-2, EN61000-6-4 |
| Protocol | IEEE 802.3x full-duplex, back-pressure half-duplex |
| Jumbo Frame Support | 9 KBytes |
| MAC Table Size | 8 KBytes |
| Network Management | |
| Network Redundancy | IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP |
| VLAN (IEEE 802.1Q) | IEEE 802.1Q tag-based; IEEE 802.1ad Double Tagging; IGMP v1, v2; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering; IEEE 802.1ab Link Layer Discovery Protocol (LLDP) |
| IGMP Snooping / GMRP | IGMP v1, v2 with up to 255 multicast groups; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering |
| IP Security | IP and MAC-based access control; IEEE 802.1X authentication Network Access Control; Multicast/Broadcast/Flooding Storm Control |
| QoS | 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping traffic |
| Protocols | CLI, WEB-based Management; SNMP v1, v2c, v3; Telnet (5 sessions); HTTPs, SSH; Radius Client for Management; TFTP/FTP for Configuration Import/Export; TFTP/FTP for Firmware Upgrade; Syslog; RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB; DHCP; NTP and SNTP, Static trunk or Dynamic via LACP (Link Aggregation Control Protocol) |
| Reliability | Link loss recovery < 20 ms, single and multiple rings supported |
| Interfaces | |
| Power over Ethernet (PoE) | PoE, PoE+ |
| Power | |
| PoE Power Output | 145 Watts |
| Rated Power | 12 to 58 VDC, Redundant input terminals (54 to 58 VDC for PoE+) |
| Power Consumption | 14 Watts (standby, no PoE output) |
| Reverse Polarity Protection | Yes |
| Mechanical | |
| Mounting | DIn rail or wall mount |
| Ratings | |
| Operating Temperature | -40 to +167°F (-40 to +75° C) |
| Storage Temperature | -40 to 185° F (-40 to 85° C) |
| Humidity | 5 to 95%, non-condensing |
| Download Name | File Size |
| Black Box Industrial Gigabit Switches Datasheet | 1.39MB |
| Black Box Command Line Interface Guide | 470.42KB |
| Black Box Industrial Ethernet Switches User Manual | 20.15MB |
| LIE1080A Manual.pdf | 11.64MB |
| LIE1080A Quick Start Guide.pdf | 312.64KB |
