Reliability and efficiency are key elements of industrial communications. That’s why network engineers rely on Antaira for their Ethernet switch needs. The LMX-1002G-10G-SFP 10-port managed Ethernet switch with two dual-rate 10G SFP slots is perfect for intelligent transportation, security and surveillance, and power utility networks. The 10-gigabit fiber-optic interfaces extend data traffic past traditional buildings, campuses, and towns. The substantial 10-gigabit link speed allows the switch to aggregate and transmit multiple high bandwidth traffic securely over long distances.
This switch is rich in Layer 2 and partial Layer3 management functions. It implements Ethernet Ring Protection Switching (ERPS) for immediate fault recovery, QoS, SNMP, IGMP, IPv4/IPv6, IEE802.1Q VLAN, LLDP, DHCP, alarming, fault handling, and configuration backup. It also incorporates a CLI and user-friendly web console for quick setup and deployment.
An industrial Ethernet switch isn’t complete without its ability to withstand severe factory floor and outdoor environments. Regulated power is a concern in massive industrial operations. That’s why you get redundant (primary and secondary sources) power input with high voltage and overload current protection. The LMX-1002G-10G-SFP switch supports a wide operational temperature and meets safety and electrical approvals.
With eight Gigabit RJ45 ports and two 10G fiber optic connections, this managed switch can not only move tremendous amounts of data, but it can also administer your network operations. When you need durability, count on the LMX-1002G-10G-SFP to be a cornerstone of your communication system.
|Ethernet Ports||8 Gigabit (10/100/1000TX), Auto MDI / MDI-X|
|Fiber Ports||2 SFP+ Slots (1G and 10G)|
|Wavelength||Refer to SFP Module|
|Standards||IEEE 802.3, 802.3u, 802.3ab, 802.3.ad, 802.3z, 802.3ae, 802.3x, 802.1d, 802.1p, 802.1w, 802.1X, 802.1AB, 802.1Q, ITU-T G.8032 / Y.1344 ERPS|
|Industrial Protocol||Modbus TCP|
|Jumbo Frame Support||9.6 kBytes|
|MAC Table Size||16 kBytes|
|Network Redundancy||STP, RSTP, MSTP, and G.8032 ERPS Ring Redundancy (recovery < 50 ms)|
|IEEE 802.1Q VLAN||Port Based, Tag Based, 1 to 4094|
|IGMP Snooping / GMRP||IGMP v1, v2 and Query Mode. Up to 1024 Groups|
|IEEE 802.1x Authentication||RADIUS Support|
|IP Security||Up to 10 Specific IP Addresses|
|QoS||8 Priority Queues per Port|
|System Alert Email||By Exception Through Email|
|Serial Console||RS-232 (RJ45 port)|
|Configuration Backup||USB 2.0 Port|
|System Configuration||Web Console, Telnet, CLI|
|Protocols||IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDP-MED, HTTP, HTTPS, SSHv2 telnet, DHCP client, DHCPv6 client, DHCP server, Port Mirror, DNS client/proxy, IP based Access Filter, ICMPv6, syslog, Time Zone /Daylight Saving, NTP client, RMON, sFlow, Loop detection, Console Port, Power Lost Warning, Relay Trigger|
|Power Consumption||15.5 Watts|
|Connection||1 removable 6-pin terminal block|
|Input Voltage||12 to 48 VDC, Redundant|
|Relay Alarm Contact||1A @ 24VDC|
|Reverse Polarity Protection||Yes|
|Dimensions||54 x 142 x 99 mm|
|Mounting||DIN-rail or wall mount|
|Operating Temperature||-40 to 60°C|
|Storage Temperature||-40 to 90°C|
|Humidity||5 to 95% non-condensing|
|Certifications||FCC, CE, UL 61010-1, UL 61010-2-201|