Stay connected while on the go. The Cel-Fi GO, an all-in-one smart cellular LTE signal booster, is the best solution for improving poor cellular coverage while on the road. It eliminates dropped calls, intermittent audio, slow streaming, and unsent texts. With an industry-leading 70 dB gain, the Cel-Fi GO-M booster kit is ideal for automobiles, trucks, and vans. An in-vehicle booster captures cellular signals with a donor antenna mounted on the exterior of the vehicle. The donor antenna sends the signal to the GO-M, which amplifies the signal and rebroadcasts it through the server antennas mounted inside the vehicle.
The cell booster kit includes every component you need to outfit your car or truck with superior wireless voice and data wireless performance. The kit includes the GO-M signal booster, a high-performance magnetic-mount donor antenna with cable, server antenna with cable, and a 12-volt power adapter
Cel-Fi GO Cellular Booster
Cel-Fi A41-V21-100 Mobile Donor Antenna
Cel-Fi A41-V30-100 Mobile Server Antenna
Cel-Fi WAVE is a cell phone app and cloud-based platform designed for end-users and installers for activating, setting-up, monitoring, and managing the Cel-Fi GO. The app connects to the device via Bluetooth and is available on smartphones and tablets. It’s available on iOS, Android, Tencent, PC, and Mac devices.
Register (when required):
Cel-Fi signal boosters are the only cellular coverage solution authorized for use in nearly 100 countries by nearly 200 mobile operators. The Cel-Fi mobile bundle is compatible with all cellular phones and smart devices. The system supports multiple users and multiple carriers. It’s approved for use on all major mobile carriers in the USA like AT&T, Verizon, T-Mobile, Sprint, and US Cellular. The Cel-Fi GO vehicle operates only on your carrier’s bands and doesn’t create interference with nearby wireless devices. Although the GO supports multiple carriers, the system will only operate with one carrier at a time. Use the Cel-Fi WAVE app to set the GO to your carrier. If you switch to another mobile carrier, you may change the carrier anytime using the WAVE app.
The steps below have been simplified. Before you begin, please download and read the Quick Start Guide under the Documents tab. Installation instructions start on page 4. The donor antenna is installed on the exterior of the vehicle, and the server antenna and GO are mounted inside the vehicle. For permanent installation, route cables behind interior trim panels for a professional look and protection.
|LTE Frequency||Bands 2, 4, 5, 12,13|
|Carrier||AT&T, Verizon, Sprint, T-Mobile, US Celluar, CGI Alaska|
|Antenna||Donor and server included with kit|
|Power Consumption||16 watts nominal|
|Input Voltage||9.6 - 16.5 VDC (12-volt power adapter included)|
|Cabling||Included with kit|
|Dimensions||272.5 x 96.5 x 43.5 mm|
|Operating Temperature||0° to 65°C|
|Humidity||0% to 95%, noncondensing|
|Certifications||NEMA 4, CE, ISED, FCC Parts: 15, 20, 22, 24, 27; Bluetooth BQB|