Your shopping cart is empty!
MENU
Manufacturer: Black Box
The very reliable LGH1006A Industrial Ethernet Switch, (4) 10/100/1000-Mbps, (2) GE SFP, is designed for the far edges of your network. Use it in cold, dirty, indoor environments with temperature extremes of -40° to +70°C, such as loading docks or monitoring stations. The switch has DIN rail mounting with 12-48VDC input and comes in an IP31-rated enclosure. The rugged metal case serves as a heat sink to dissipate heat, so there are no fans to go bad.
The 100/1000Base-X Ethernet SFP ports give you networking flexibility and scalability. You can extend your network over multimode or single-mode fiber at distances up to 30 kilometers, depending on the SFP you choose. For redundancy, the switch has two DC power inputs. If one power source fails, the switch automatically falls over to the second power source. In addition, a smart alarm will alert you in case of a power failure. For easy, plug-and-play setup, the 10/100/1000-Mbps Ethernet ports are autosensing with Auto MDI/MDI-X.
The LGH1006A can be used in a wide variety of applications, such as:
This switch delivers line-rate, non-blocking throughput with a 2K MAC address table and 1MB buffer memory. Ports are auto-negotiating for speed and half/full-duplex and include LED indicators to view the port status. This unmanaged switch is plug and play and does not require any configuration.
This industrial switch does not include a power supply. Use it with the MDR-40-12, MDR-40-24, SDR-120-48, or the SDR-240-48.
| Technology | |
| Category | Ethernet Switch |
| Total Ports | 6 |
| Ethernet Ports | 4 Gigabit (10/100/1000TX) |
| Fiber Ports | 2 SFP slots |
| Processing Type | Store and forward |
| Standards | IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3z |
| Protocol | IEEE 802.3x back pressure flow control |
| Transfer Rate | 1000-Mbps: 1,488,000 pps; 100-Mbps: 148,800 pps; 10-Mbps: 14,880 pps; Quality of Service (QoS) for packet forwarding precedence |
| Jumbo Frame Support | 1 MB |
| MAC Table Size | 2 KBytes |
| Transmission Distance | RJ-45 ports up to 100 m (328 ft.) and SFPs slots: 62.5/125-µm multimode fiber, up to 220 m/850 nm or 2 km/1300 nm; 50/125-µm multimode fiber, up to 550 m/850 nm or 2 km/1300 nm; 9/125-µm single-mode fiber, up to 80 km |
| Network Management | |
| System Configuration | 4 DIP switches for setting power failure relay alarms (enable/disable) and SFP 10/1000 Mbps speed settings |
| Monitoring & Event Handling | Relay output with current carrying capacity of 1A @ 24 VDC |
| Power | |
| Rated Power | 12 to 48 VDC redundant inputs |
| Power Consumption | 3.36 Watts |
| Input Connection | Removable 6-pin terminal block |
| Reverse Polarity Protection | Yes |
| Mechanical | |
| Enclosure | Aluminum alloy case |
| Mounting | DIN-rail or wall mounting |
| Shock / Vibration | Shock: IEC60068-2-27, Vibration: IEC60068-2-6 |
| Ratings | |
| Operating Temperature | -40 to 158° F (-40 to 70° C) |
| RoHS Compliant | Yes |
| Certifications | FCC Part 15, Subpart B, Class A; UL60950-1 2nd Ed./CSA C22.2 No. 60950-1-07 2nd Ed.; CE (EMI): EN55022 Class A, FCC Part 15, Class A; CE (EMS): EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS) |
| Download Name | File Size |
| LGH1006A Quick Start Guide.pdf | 863.14KB |
