Black Box CL050A-R3 Async RS-232 to Current Loop Interface Converter

Black Box CL050A-R3 Async RS-232 to Current Loop Interface Converter, DB25 to Terminal Block
Model: CL050A-R3
Availability: Discontinued

***DISCONTINUED***  This product is discontinued. Contact Westward Sales to discuss an alternative option.

 

Black Box CL050A-R3 Async RS-232 to Current Loop Interface Converter, DB25 to Terminal Block

The CL050A-R3 RS-232 to Current Loop Interface Converter is a bidirectional, self-contained unit that enables you to interconnect a digital 20/30/60-mA unipolar Current Loop interface to an RS-232 interface. The converter cannot be used with an analog Current Loop (4 to 20 mA) or bipolar Current Loop. This Active/Passive Current Loop Interface Converter uses AC power and acts either as an active or passive device on the Current Loop. As an active device, this converter supplies 20-, 30-, or 60-mA loop current at 18 VDC for operation. As a passive device, this converter will not supply loop current, but will operate with 20-, 30-, or 60-mA unipolar current at up to 30 VDC.

Optical isolators in both the Transmit and Receive loops keep out electrical interference. With front-panel LEDs you always know the status of your data. The easy-to-use self-test feature checks the converter's internal circuitry.Connect this converter to either a modem or mux. Just flip the switch to attach a terminal or computer. Your RS-232 devices are protected from dangerous transients too.

Key Features

  • Interconnect a digital 20/30/60-mA unipolar Current Loop interface to an RS-232 interface
  • Configure this AC-powered converter to match your system's 20-, 30-, or 60-mA Current Loop interface
  • Has built-in optical isolation on the receive pair
  • DCE/DTE switch for easy direct connection no special cables needed
  • Two LEDs monitor data flow
  • Optical isolators in both the Transmit and Receive loops keep out electrical interference
  • AC-powered, active or passive
  • 1 Year Double Diamond™ Warranty (Standard) included

In the Box

  1. (1) RS-232 to Current Loop Interface Converter
  2. (1) 6-foot (1.8-m) AT® Modem Cable
  3. (1) DB9 Male to DB25 Female AT Adapter
  4. Users’ manual
Technology
CategorySerial Connectivity
SFP Characteristics
InterfaceRS-232 (DTE/DCE switch selectable)
Serial Interface
Flow ControlFull- or half-duplex
Power
Rated Power115VAC
Mechanical
Dimensions1.8"H x 5.5"W x 8.5"D (4.6 x 14 x 21.6 cm)
Weight1.5 lb. (0.7 kg)
Tags: CL050A-R3