Industrial networking demands high-performance and flexibility. While many devices within an extensive network are static, you need a few critical pieces that adapt to significant changes on the fly. Antaira Technologies builds Ethernet switches suited to these tasks. That has never been truer than with the LMP-2602G-SFP. This large 1U rackmount switch features 24 Gigabit Power over Ethernet (PoE+) Ethernet ports alongside 2 SFP combination ports (select SFP or RJ45). It brings powerful, long-range networking when and where you need it.
Each of the 24 PoE+ ports supplies up to 30 watts, enabling you to substantially cut power runs to surveillance cameras and other PoE powered devices. The fully managed software offers precise control over the network, optimizing security, and performance. Layer 2 protocols such as SNMP, ERSP, QoS, VLAN, IGMP, and Modbus improve network resiliency and reliability.
Most importantly, this is as tough as switches get. It’s capable of operating in extreme temperatures (-40° to 75°C) that reach far below freezing and far above desert heat. It is substantially protected against electrical surge, shock, and vibration. It performs flawlessly in some of the harshest environments imaginable. A 5-year warranty backs that performance.
LMP-2602G-SFP, Standard operating temperature, -10° to 65°C
LMP-2602G-SFP-T, Extended operating temperature, -40° to 75°C
The LMP-2602G-SFP industrial Ethernet switch fits a vast range of industry networks. No matter your networking needs, there is a solution that will optimize performance per dollar. At Westward Sales, we specialize in finding those perfect solutions. Contact our devoted team of networking experts to find the best, rugged electronics for your project.
|Ethernet Ports||24 Gigabit (10/100/1000TX) PoE/PoE+, Auto MDI / MDI-X|
|Fiber Ports||2 SFP Slots (100/1000FX)|
|Wavelength||Refer to SFP Module|
|Standards||IEEE 802.3, 802.3u, 802.3ab, 802.3af/at, 802.3z, 802.1w, 802.1d, 802.1s, 802.1X, 802.1Q, 802.1AB 802.1p, and ITU-T G.8032 / Y.1344 ERPS|
|Jumbo Frame Support||9.6 Kbytes|
|MAC Table Size||8 KBytes|
|Network Redundancy||STP, RSTP, MSTP, and G.8032 ERPS Ring Redundancy (recovery < 50 ms)|
|IEEE 802.1Q VLAN||Port Based, Tag Based, 1 to 4094|
|IGMP Snooping / GMRP||IGMP v1, v2 and Query Mode. Up to 256 Groups|
|IEEE 802.1x Authentication||RADIUS Support|
|QoS||8 Priority Queues per Port|
|System Alert Email||By Exception Through Email|
|Serial Console||RS-232 (RJ45 port)|
|System Configuration||Web Console, Telnet, CLI, SNMP, SSH|
|Protocols||IGMP, SNMPv1/v2/v3, HTTP, Telnet, VLAN, QoS, RIP, OSPF, Syslog, link aggregation, port mirroring, VRRP, static routing table, RSTP redundancy|
|Power Consumption||720 watts with PoE, 24 watts standby|
|Connection||8-Pin Terminal Block|
|Input Voltage||48 to 55 VAC|
|PoE Pin Assignment||V+, V+, V-, V- for pins 1,2,3,6, Endspan, MDI/MDIX Alternative A|
|Enclosure||Fanless, metal, 1U rackmount|
|Dimensions||440 x 200 x 44 mm (1U x 19" x 10.2" deep)|
|Shock / Vibration||IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6|
|Operating Temperature||Standard: -10 to 65°C | Extended: -40 to 75°C|
|Storage Temperature||-40 to 85°C|
|Humidity||5 to 95% non-condensing|
|Certifications||FCC, CE, UL 61010-1, 2-201|
|EMC||EN55024, EN55032, EN61000-6-4 Class A, IEC61000-4-2, -3, -4, -5, -6, -8|