Antaira LMP-1002C-SFP (-24 -T) 10-Port PoE+ Managed Ethernet Switch, 2 SFPs

Antaira LMP-1002C-SFP 10-Port  PoE+ Managed Gb Ethernet Switch
Model: LMP-1002C-SFP
Availability: IN STOCK

Choose Options

Voltage Input:

Operating Temperature:

Qty: Add to Cart

10-Port Industrial, Managed Ethernet Switch with 8 PoE+ Fast Etherent Ports and 2 Gigabit Combo Ports

When you need a rugged Ethernet switch packed with managed PoE ports, turn to the Antaira Technology LMP-1002C-SFP.  This managed Ethernet switch features 10 ports -- 8 ports of  Power over Ethernet Plus (PoE+) and 2 combo ports (a combo port may be enabled as an SFP port or copper RJ45 port).  Compliant to the IEEE 802.3at/af specification, each PoE+ port delivers up to 30 watts per port to power devices such as IP cameras and wireless bridges.

As a fully manageable Layer 2 switch, it is loaded with features such as a web management console, ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) redundancy, advanced network filtering, IGMP, VLAN, QoS, SNMP, port lock, RMON, ModbusTCP, 802.1X/HTTPS/SSH/SSL and a lot more

The LMP-1002C-SFP enclosure is IP30 rated, DIN-rail or wall mountable and supports a standard and extended operating temperature.  It provides high EFT and ESD protection necessary for industrial networking applications.  The LMP-1002C-SFP is suited for power utilities, water and wastewater treatment facilities, oil and gas, mining, factory automation, security and surveillance.


  • 8 Fast Ethernet ports (10/100TX) of PoE+
  • 2 Gigabit Combo ports, choose RJ45 or SFP slot per combo port
  • Network redundancy - STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS)
  • Web based management, SNMP v1/v2/v3, serial console port
  • QoS, traffic classification QoS, Cos, bandwidth control for Ingress and Egress, broadcast storm control, Diffserv
  • IEEE802.1q VLAN tagging, port-based VLAN support
  • IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 groups
  • IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP, HTTPS, SSH/SSL, TFTP
  • MODBUS TCP for SCADA system integration
  • Port configuration - status, statistics, mirroring, rate limiting, event syslog
  • E-mail event notification for Start, Power Failure, Authentication, SNMP trap and Fault Alarm Relay Output
  • Software upgradable via TFTP and HTTP
  • Configuration backup with USB port
  • Ping alarm for PoE power recycle
  • System warnings through e-mail
  • Redundant 48 to 55 VDC input
  • Metal IP30 rated housing with DIN rail and wall mount support
  • Standard operating temperature of -10°C to 70°C; or extended temperature of -40°C to 75°C
  • 5-year warranty


Part NumberOptionDescriptionSize
LMP-1002C Standard operating temperature, Redundant 48 - 55 VDC input54 x 142 x 99 mm
LMP-1002C-T-TExtended operating temperature, Redundant 48 - 55 VDC input54 x 142 x 99 mm
LMP-1002C-24-24Standard operating temperature, Redundant 12 - 36 VDC input54 x 142 x 99 mm
LMP-1002C-24-T-24-TExtended operating temperature, Redundant 12 - 36 VDC input54 x 142 x 99 mm


  • LMP-1002C-SFP
  • Documentation on CD -ROM
  • DC cable with 18 AWG leads and DC jack (5.5 x 2.1 mm)
  • Serial console cable
  • Brackets and screws for wall mounting
Total Ports10
Ethernet Ports8 x Gigabit (10/100/1000TX) PoE/PoE+ ports, Auto MDI / MDI-X
Fiber Ports2 x Gigabit (100/1000TX) Combo Ports (RJ45 or SFP)
WavelengthRefer to SFP Module
StandardsIEEE 802.3, 802.3u, 802.3x, 802.3ad, IEEE 802.1d, 802.1w, 802.1s, 802.1Q, 802.1X, 802.1p, ITU-T G.8032/Y.1344 ERPS (Ethernet Ring Protection Switch) Protocol
ProtocolIGMPv1/v2, SNMPv1/v2c/v3, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH/SSL, Modbus/TCP, LLDP, IPv4/IPv6
Industrial ProtocolModbusTCP
MAC Table Size8K
Network Management
Network RedundancySTP, RSTP, MSTP G.8032 ERPS Ring Redundancy Recovery <50ms
IEEE 802.1Q VLANPort Based, Tag Based, 1 ~ 4094
IGMP Snooping / GMRPIGMP v1, v2 and Query Mode. Up to 256 Groups
IEEE 802.1x AuthenticationRADIUS Support
QoSProvides 4 Priority Queues per Port
System Alert EmailBy Exception Through Email
Serial ConsoleRS-232 (RJ45 jack)
Configuration BackupUSB port
System ConfigurationWeb Console; Telnet; CLI
PoE Power OutputMaximum 30 watts per PoE port
Input Voltage48 - 55VDC, Redundant | 12 - 36VDC, Redundant
Power Consumption255 Watts @ 48 to 55VDC
Connection1 Removable 6-Contact Terminal Block
EFT Protection2,000 VDC
ESD Protection6,000 VDC
Reverse Polarity ProtectionYes
PoE Auto-Ping CheckYes
EnclosureMetal, IP30 Protection
Dimensions54 x 142 x 99 mm
Weight2.4 lbs.
MountingDIN-rail or wall mount
Shock / VibrationIEC60068-2-27, IEC60068-2-32, IEC60068-2-6
Operating Temperature-10 to 70°C or Extended: -40 to 75°C
Storage Temperature-40 to 85°C
Humidity5 to 95% non-condensing
RoHS CompliantYes
CertificationsFCC, CE, UL 508 (Pending)
EMCFCC Class A, CE EN6100-4-2, EN6100-4-3, EN6100-4-4, EN6100-4-5, EN6100-4-6, EN6100-4-8, EN6100-4-11, EN6100-4-12, EN6100-6-2, EN6100-6-4
Warranty5 Years