The HDR-30 DIN-rail power supply provides 30 watts for powering networking switches, relays and other control cabinet electronics. It easily snaps onto any standard DIN-rail (TS-35/7.5 or TS-35/15). It protects against short circuits, overload, over voltage and over temperature. LED indicators are provided for power-on. Select 12 or 24 volts.
NOTE: A power cord is not included and sold separately.
|Rated Power||30 watts|
|Output Voltage||12V | 24V|
|Input Voltage||85 to 264 VAC | 120 to 370 VDC|
|Overload Protection||105 to 160% rated output power|
|Inrush Current||COLD START 25A/115VAC 45A/230VAC|
|Hold Up Time||30ms/230VAC 12ms/115VAC at full load|
|Over Voltage Protection||Yes|
|Dimensions||35 x 90 x 54.5 mm (WxHxD)|
|Operating Temperature||-20 to 60°C (refer to output derating curve)|
|Safety Standards||UL60950-1, UL508, TUV EN61558-2-16, IEC60950-1, EAC TP TC 004, BSMI CNS14336-1 approved; Design refer to TUV EN60950-1|
|Withstand Voltage||I/P-O/P: 4KVAC|
|Download Name||File Size|
|HDR-30 Data Sheet||873.18KB|