A significant challenge in the world of communication is utilizing equipment in harsh outdoor and industrial locations. Fortunately, WoMaster answers with the WA212BP Rugged Access Point. It provides fast, reliable wireless networking in the face of brutal environments. This industrial long-range WiFi access point configures as a repeater, access point, client, or bridge, making it suited for any wireless job.
The access point utilizes the 2.4 GHz frequency and minimizes interference with standard wireless devices while maintaining universal compatibility. It expands on that compatibility with standard encryption protocols that include AES, WEP, and TKIP. This hub is packed with routing, advanced security, network management, and VPN services. The WA212BP also supports several industrial and cloud platforms such as MQTTS, AWS, Azure, and WoMaster’s monitoring dashboard named ThingMaster. Utilizing dual Fast Ethernet ports with Power Over Ethernet (PoE), installation time is minimized. In addition, embedded high-gain MIMO antennas increase signal reliability and bring fast communication across vast distances up to 2 km at 300 Mbps.
The WA212BP is housed in a plastic, sealed IP55 case. It is entirely waterproof, temperature tested to operate in extremes from -30° to 60°C and meets industrial electrical and safety standards.
High Throughput and Extended Range Wireless Communication
High Power, High Gain, and Smart RF management
Easy and WLAN Secure Management
Rugged, Outdoor Rated Design
Network Routing with Enhanced Cyber Security
Industrial IoT LAN and Cloud Management
Point-to-Point and Point-to-Multiple-Point Configurations
WA212BP supports AP, Client, and WDS modes. Users can configure one WA212BP in AP mode, and the other as a client for a point-to-point connection. It is an easy way to extend the wireless distance.
If the user has multiple sites and would like to send traffic to a central location, the central unit may be configured in AP mode and the other access points in Client mode. To enhance the distance of the point-to-multiple-points, use the WoMaster WA512 and high-gain omnidirectional antennas as the central AP while the other WA212BP with directional antennas are clients.
Long-Range Wireless Connectivity without Bandwidth Loss
The WA212BP, equipped with two Fast Ethernet ports, supports Bridge and Router modes. In Bridge mode, traffic between the two Ethernet ports is switched without bandwidth loss and users can expand wireless coverage to obtain high bandwidth backhaul. The WAN port supports Secure Remote Access and Cloud IIoT management.
WA212BP can act as a VPN server for data encryption and dynamic remote access. Multiple VPN protocols are supported, such as OpenVPN, GRE, and L2TP. The channels between multiple networks, e.g., private, public, and hybrid, are fully secured with authentication.
In mission-critical industrial applications, encryption is mandatory, and by default, TCP connections do not use encrypted communication. MQTT relies on the TCP transport protocol. To encrypt the entire MQTT data stream, ThingsMaster and other MQTT brokers allow TLS instead of plain TCP. The MQTTS is standardized at IANA as “secure-MQTT”. All WoMaster Routers and Switches support the latest TLS v1.2 encryption and X.509 authentication.
ThingsMaster OTA (device management over-the-air) is an embedded agent which remotely upgrades the WR212 from your mobile device. ThingsMaster OTA is a secure application installed in private or public service or QNAP NAS (network-attached storage). With OTA, all device information such as location, warning events can be shown in real-time. Maintenance such as configuration reload or device reboot can also be run by the group.
|Type||WiFi Access Point|
|Ethernet Ports||2 Fast Ethernet (10/100TX)|
|Standards||IEEE 802.3, 802.3u, 802.11n, 802.11ac|
|Industrial Protocol||MQTTS, CoAP, RESTful API|
|Firewall Features||Static routing, NAT, NAPT (SNAT/DNAT), port forwarding, DMZ, stateful Inspection firewall, IP/Port Filter, MAC ACL|
|Authentication||TACACS+ and multi-user authentication|
|VPN Features||OpenVPN, L2TP, GRE, IPSEC by request|
|IP Security||IEEE 802.1X/RADIUS, TLS v1.2, HTTPS/SSH, First login password management, MAC Filter|
|System Configuration||CGI WebGUI, Command Line Interface (CLI), Telnet, SNMP v1/v2c/v3, IPV4/V6, DDNS (cellular), DHCP server/client, DHCP relay, TFTP, SMTP, ARP response over 802.2 LLC SNAP, Proxy ARP, DNS (client/proxy), System Log, PoE Out control, FTP (active/passive), PPPOE|
|Maintenance||ViewMaster, NetMaster, Ping, Traceroute|
|Cloud Protocols||AWS Agent, Azure Agent, ThingsMaster, ThingMaster OTA|
|Wi-Fi Frequencies||2.4 GHz (2.412 ~ 2.462 GHz)|
|Data Rate||802.11b: 11 Mbps, 802.11g: 54 Mbps, 802.11n: 300 Mbps|
|Antenna Type||Embedded 11 dBi directional antenna with 2x2 MIMO|
|WLAN Operation Mode||Router Mode (1 WAN + 1 LAN) and Bridge Mode (2 LAN), up to 20 clients|
|Wireless Security||Share Key, WPA/WPA2, WPA2-PSK, WPA/WPA2 Enterprise, 64/128-bit WEP, TKIP (WPA-PSK), and AES (WPA2-PSK)|
|IEEE 802.11 Frequencies||IEEE 802.11n/g/b compliant|
|Time Protocol||NTP, SNTP|
|Power Consumption||2 W at full traffic|
|Input Voltage||100 to 240 VAC, 50/60 Hz|
|Dimensions||281 x 92 x 50 mm (H x W x D)|
|Mounting||Pole or wall|
|LED Indicators||Power, System, and Network status|
|Operating Temperature||-30 to 60°C|
|Storage Temperature||-30 to 80°C|
|Humidity||10 to 95% non-condensing|
|Certifications||IP55, CE RED, EN 55022, EN 55024, EN 62368-1, EN 301 489-1 V1.9.2, EN 301 489-17 V2.2.1, EN 300 328 V1.8.1:2012, EN 60950-1:2006+A11:2009+A1:2010+A12:2011, FCC Part 15 sub B and sub E, ICES003|
|Download Name||File Size|
|WoMaster WA212BP Datasheet||879.51KB|
|NetMaster||WoMaster Netmaster Industrial Network Management System Software||$300.00|