SENA ZE10 ProBee ZE10 ZigBee OEM Module & Starter Kit

ProBee ZE10 ZigBee OEM Module & Starter Kit
Model: ZE10
Availability: Discontinued
Price: Request Quote

Choose Options

Module Configuration:

Qty: Request a Quote

*** DISCONTINUED *** This ZibBee module is no longer available.  Contact our Sales Department for further information.


ProBee ZE10 ZigBee OEM Module and Starter Kit

The ProBee ZE10 is a short range ZigBee OEM module with integrated ZigBee core.  Offering radio, antenna circuits and a high-level software interface, OEM manufacturers can easily and economically embed ZigBee functionality into their products. The ZE10 module is designed for low-cost and low-power wireless applications commonly found in advanced metering, home automation, smart appliances, health care devices, commercial building automation, lighting and climate control, security and telecommunication services.

The ZE10 is built from the Ember EM250 ZigBee core which has been certified by the ZigBee alliance.  It uses the ZigBee 2007 and ZigBee Pro stack.  Despite low power consumption, the ZE10 provides high performance.  It transfers data at 250 kbps at a line-of-sight distance of 1.6 kilometers (1 mile). The ZE10 family offers a choice of several antennas.


  • Ember EM250 ZigBee core with 2.4GHz, IEEE 802.15.4 compliant coprocessor
  • Supports ZigBee 2007 and  ZigBee Pro Stack
  • Choose from 1, 3, or 5 dBi antennas
  • UART serial signal
  • 4 analog inputs and 13 digital inputs/outputs
  • Remote management, system configuration and firmware upgrade using modem AT command set
  • Supports rich neighborhood device scanning and monitoring
  • Windows configuration tool available

The ZE10 starter kit, ZE10-SK01, is configured for rapid prototyping and software development.  The kit includes every part you need to get started quickly:  three OEM modules, development boards, antennas, power adapters, cables and configuration software.


SENA Part NumberWestward Part NumberDescriptionSize
ZE10C-00ZE10-CProBee ZE10 ZigBee OEM module with chip antenna41.7 x 23 x 11.15 mm
ZE10U-00ZE10-UProBee ZE10 ZigBee OEM module with U.FL connector41.7 x 23 x 11.15 mm
ZE10S-00ZE10-SProBee ZE10 ZigBee OEM module with RPSMA connector51.7 x 23 x 11.15 mm
ZE10 Starter KitStarter Kit Components & DescriptionQuantity
ZE10-SK01ZE10-SK01ZE10C-00, ProBee ZE10 ZigBee OEM module with chip antenna
ZE10U-00, ProBee ZE10 ZigBee OEM module with U.FL connector
ZE10S-00, ProBee ZE10 ZigBee OEM module with RPSMA connector
DAT-G01R, 3 dBi Dipole Antenna, RP-SMA Plug, Right-hand Thread
UEC-G01R, 12cm U.FL to RPSMA Cable, Right-Hand Thread
Development boards
AC / DC power adapters
RS-232 serial cables
USB cables


Channels14 with 5 MHz spacing
DistanceWorking distance 1.6 km with 5 dBi dipole antenna
Data Rate250 kbps
Sensitivity-102 dBm at 1% BER
Zigbee NetworkMesh / ZigBee 2007 & ZigBee Pro stack profile / channel, PAN ID, EPID network addressing
Zigbee Data TransmissionUni-cast, multi-cast, broadcast, many-to-one and data re-transmission for enhanced reliability
Wireless SecurityNetwork Layer security with one Trust Center for efficient operation / NIST-approved security / 128-bit AES encryption
Transmit Power+20 dBm E.I.R.P. (maximum)
Serial1 UART with serial data rate of 1 Mbps
Digital IO13 inputs / outputs
Analog Inputs4
ManagementConfigure with AT commands & ProBee Manager / remote configuration & firmware upgrade / supports rich neighborhood device scanning and monitoring
Input Voltage5 to 12V DC
Radio PowerTX current at 190mA at 3.3V (maximum) / RX current at 45mA at 3.3V (maximum)
Sleep Current Less than 2 uA
Connector Type2.0 mm pin header, 14 x 2 rows
Dimensions41.7 x 23 x 11.15 mm / 51.7 x 23 x 11.15 mm with RPSMA connector
Operating Temperature-40 to 85°C
CertificationsFCC, CE, TELEC, KCC
Warranty3 year