Black Box EME1SS-005 AlertWerks Siren and Strobe Light Sensor, 8 Super Bright LEDs

Black Box EME1SS-005 Combined Siren and Strobe Light Sensor with 5-ft. CAT5 Cable

The EME1SS-005 is a combined siren and strobe light sensor that adds eye-catching visual and audio alarms to the AlertWerks Hubs. When triggered, the siren generates a loud alarm sound and the strobe light flashes brightly, alerting you to an alarm condition. The siren and alarm are incorporated into one device. Connect up to two sirens and strobes to the intelligent sensor ports on the hub (EME134A) or hub expansion module (EME1X8). Each device comes with a 5-foot (1.5-m) CAT5 cable. You can connect the siren/strobe light using up to 1000 feet (304.8 m) of your own CAT5 cable, positioning the sensors in hot spots. When you plug a combined siren/strobe light into the intelligent sensor port, the base unit will also detect the sensor. It displays the device’s status. You can trigger the siren/strobe light manually via the Web interface or you can configure it to turn on at certain times.

The device can be triggered by any sensor connected to an AlertWerks hub (EME134A), or by an alarm  condition generated by the base unit. You can fully integrate it with the sensor notification matrix on the V4E (EME134A). Each device has its own SNMP OID so that status can be collected over the network. You can also control the siren and strobe via SNMP across a network.

Key Features

• Combined siren and strobe on a single Intelligent sensor port.
• Powered by the Environmental Monitoring System Hub
• Can be extended up to 100 ft. from the base unit
• 100db Siren sound
• 400x per minute flashing strobe
• The light source consists of eight super-bright LEDs
• Siren sounds at 100 ± 3 dB at 100 cm
• Plug-and-play installation
• Supports maximum cable runs of up to 1000 feet (304.8 m)
• Can be triggered by any other sensor connected to an AlertWerks ServSensor hub
• Works with the EME134A gateway