Black Box LB524A-KIT-R2 Managed Ethernet Extender Kit, 4-Wire, 4-Port

Black Box LB524A-KIT-R2 Managed Ethernet Extender Kit, 4-Wire, 4-Port
Model: LB524A-KIT-R2
Availability: Discontinued

***DISCONTINUED*** This product is discontinued. Please see the LB522A-KIT-R2 as an alternative option. .

 

Black Box LB524A-KIT-R2 Managed Ethernet Extender Kit, 4-Wire, 4-Port

The Black Box LB524A-KIT-R2 is a cost effective Ethernet Extender. It is the ideal choice for providing internet access to bandwidth hungry small to medium size offices, wireless backhaul, Metro Ethernet, even LAN to LAN extensions. It's easy to use, too. Plug-and-play means that you'll be up and running in seconds, and the built-in MDI-X works with either straight-through or crossover cables.

This kit includes a pair of auto-rate Ethernet extenders, using a standard 4-wire connection, which simplifies your life and provides cost-effective network extension by enabling you to make the most of your pre-existing twisted-pair infrastructure. You'll be able to connect remote LANs across distances and at speeds previously unheard of. An auto-rate feature ensures that you achieve the highest possible speed on each connection. This 4 port 10BASE-T/100BASE-TX Ethernet Extender uses G-SHDSL technology to provide an easy, inexpensive way to extend the reach of your Ethernet network over ordinary voice-grade copper wire. The device include external 90-240VAC power supplies. Management interfaces include a web based GUI, SNMP, and a console port.

The pair autosenses the data rate up to 22.8 Mbps at a distance of 4750 feet (1450 m) to provide reliable broadband connectivity with full-duplex symmetric rates, with lower speeds at longer distances of up to about 5.2 miles (8.3 km).

Distance Chart
4-Wire Standard, Distance on 24 AWG (0.5 mm):

Line RateMilesKm
3866.410.4
2 Mbps5.69.0
8.2 Mbps3.04.9
16.4 Mbps1.83.0
30.6 Mbps0.71.2

Key Features

  • Four Ethernet ports
  • Support QoS, CoS, and VLAN
  • A built-in console port makes setup a snap
  • An advanced auto-rate algorithm automatically determines the best possible baud rate for each connection
    and sets up the extender without the need for user interface
  • The unit has a built-in MDI-X switch so it works with either a straight-through cable or a crossover cable
  • Plug-and-play
  • 1 Year Double Diamond™ Warranty (Standard) included
Technology
CategoryEthernet Extender
Total Ports4
Ethernet Ports Gigabit Ethernet (1000/100/10BaseT)
ProtocolFull- or half-duplex with TC-PAM 32, 16 modulation, 1792 bytes MTU support
Transfer Rate22.8 Mbps at 0.8 mi. (1.4 km), full-duplex maximum
Transmission Distance5.2 miles (8.4 km) maximum
Network Management
VLAN (IEEE 802.1Q)IEEE 802.1q VLAN Tagging; Port-based VLAN, up to 4000 VLANs. VLAN Stacking (Q-in-Q)
QoSRate limiting, rule-based/port-based; traffic classification based on port/802.1p/DSCP; WRR (weighted round robin)/SPQ (strict priority queueing) scheduling algorithm
ProtocolsWeb-based GUI; CLI for local and console access; password protected; SNMPv1/v2 (RFC 1157/1901/1905) agent and MIB (RFC 1213/1493; software upgradable via Web browser/TFTP
Interfaces
LAN Ports802.1d transparent bridging; 2K MAC address learning bridge
Ratings
Operating Temperature32 to 122° F (0 to 50° C);
Storage Temperature-40 to 185° F (-40 to 85° C)
CertificationsFCC Part 15A; EMC Directive 89/336/EEC; Low-Voltage Directive 73/23/EEC