Black Box EMD4000T KVM-over-IP Extender Transmitter, V-USB 2.0, Audio

Black Box EMD4000T 4K DisplayPort KVM-over-IP Extender Transmitter, V-USB 2.0, Audio

The EMD4000T transmitter is part of the next generation KVM extension and matrix switching solution that simplifies access to both physical and virtual servers. Emerald 4K transmitters and receivers connect users and computers through a point-to-point connection or an IPbased KVM matrix switching network. The 4K KVM units support various video resolutions up to 4K, high-speed USB 2.0 devices and bidirectional analog stereo audio through redundant SFP+ ports. Emerald enables remote, BIOS-level computer access to both physical and virtual machines

Key Features

• Mix and match servers to your needs through the IP connections
• 4K/60 DisplayPort, HD DVI video, transparent USB 2.0 and audio
• Enterprise management with simple configuration, central system overview and enhanced access security
• Compatible with existing KVM systems like DKM™ and Boxilla™
• Switch and extend up to pixel-perfect 4K video (lossless compression, 10-bit color ready); bidirectional analog audio; and up to four USB devices (HID and/or high-speed, transparent USB 2.0), such as keyboards, mice, Wacom® tablets, touch interfaces and flash drives
• Connect Emerald 4K Receiver units with any other type of Emerald Transmitter unit (PE, SE, and ZeroU) as well as virtual machines in a single system. All 4K and HD models are fully interoperable with each other EDID pass-through feature supports a wide range of resolutions, ensuring video signals display correctly at all times
• Build a KVM matrix that supports up to 32 end points through the built-in management interface, or use the Boxilla® KVM Manager to create even larger matrices
• Transmit KVM signals over IP and securely access critical devices over a WAN or the internet.
• Real-time virtual machine access via RDP 8.1/RemoteFX or PCoIP
• OS-agnostic technology allows you to connect any system, including Windows®, Mac OS® or Linux
• Connect via dual network ports for fail-safe operation
• Active Directory support
• Supports extension distances of up to 100 meters (CATx), 300 meters (multimode fiber) or 10 kilometers (single-mode fiber)
• Combine with Switchable USB Extenders (#EMD100USB) to extend and switch USB 2.0 signals up to 480 Mbps
• Also available as a TX/RX kit that includes SFP+ modules: #EMD4000-KIT
• Works with Emerald VUE for Quad multiview capabilities in multiple modes on two 4K screens

In the Box

1. (1) Transmitter
2. (1) USB Type-A to B Cable
3. (1) DisplayPort Male to Male Cable
4. (2) 3.5mm Audio Cables, 5-ft. (1.5-m)
5. (1) 12-VDC Power Supply with US, UK, EU, and AU Power Clips
6. (4) Self-Adhesive Rubber Feet
7. (1) Pack of Self-Adhesive Strips

Notes

1. Emerald 4K Firmware v6.0 firmware is compatible with other 6.0 endpoints.
2. The EMD4000T can connect to the EMD4000R, EMD200DV-T, Emerald SE/PE Transmitters using 6.x firmware or higher, but not to an Emerald SE/PE Receiver to an EMD4000T.
3. Firmware 6.0 is not compatible with Firmware 1.4.
4. EMD4000T cannot be accessed by any version of RemoteApp to date.