Antaira EVC-3010 Ethernet Extender to Coaxial Cable (BNC Connector)

Antaira EVC-3010 10/100TX Ethernet over Coaxial Extender
Model: EVC-3010
Availability: Discontinued

*** WILL BE DISCONTINUED JULY 10, 2017 ***  This Ethernet to Coaxial Cable Extender does not have an immediate replacement.  Please contact our sales department for assistance with selecting a suitable replacement.  See Product Notice in the Downloads tab.


Antaira EVC-3010 Ethernet to Coaxial Cable Extender

Resourcefulness is an invaluable skill in networking.  And when you need to provide fast, reliable signaling to large areas, your wits will be tested. Often, the best option is to make use of existing cabling, even if that wasn’t its original purpose. Enter Antaira Technology’s EVC-3010. This compact device converts signals between Ethernet and coaxial cables. For a minimal price, you can put miles of existing cable lines to work.

This extender employs simplicity. The single BNC connector accesses the cable lines, and the single Fast Ethernet port feeds to any IP camera, switch, router or other device in need. The cable connection operates with 50 ohm or 75 ohm cables at a distance up to 3 km. It fully converts between digital and analog signals eliminating the need for extra devices that increase costs and signal delays. It is a standalone receiver enabling simple bridging.  And, the DIP switch allows easy changes between CO or CPE modes. Altogether, these features allow for the fastest coaxial data speeds possible without a complete rewiring.

As is often associated with the Antaira brand, the EVC-3010 is built for network stability. The small design makes for easy deployment in virtually any setting. It is self-powered, increasing signal integrity and affording surge protection. Extensive diagnostic indicators are supported via LED signals.  The whole package is backed by a competitive 2-year warranty.

Key Features

  • Fast Ethernet Extender Over Coaxial Cable
  • 1 BNC port
  • 1 Fast Ethernet port (10/100Tx)
  • Defines Asymmetric and Symmetric bands for upstream and downstream signals
  • Master / Slave DIP switch for CO or CPE modes
  • Choose Target Band Plan and Target SNR Margin
  • DMT (Discrete Multi-Tone) line coding
  • Extensive network diagnostic LEDS
  • 1536 bytes packet size for 802.1Q VLAN
  • Standard operating temperature 0° to 50°C
  • Standalone transceiver in a compact design
  • Wall mount or 19” rack mount chassis mount
  • 2-year warranty

Repurposing existing infrastructure to extend your network isn’t just the best solution; it is often the only solution. The EVC-3010 is small and affordable, allowing it to be a primary access provider at multiple locations without blowing your budget. Talk to one of our expert associates today. We’ll discuss the full scope of your networking needs and help you select a precise equipment package that is geared to optimize deployment resources while we help you save money on equipment.

Total Ports2
Ethernet Ports1 Fast Ethernet (10/100TX)
FunctionalityCO / CPE mode select (Select Fast and Interleaved Mode, Target Band Plan and Target SNR Mode)
StandardsIEEE 802.3 / 802.3u / 802.3x
EncodingDMT (Discrete Multi-Tone) line coding per ITU-T G.997.1, ITU-T G.993.1 and ITU-T G.993.2 (Profile 17a Support)
VDSL2 BandwidthAsymmetric and Symmetric (see data sheet for distance and speeds)
Power Consumption6.3 W
Input Voltage5 VDC @ 2A
Connector Type1 x RJ45 Ethernet (auto-negotiation and auto-MDI / MDI-X); 1 x Coaxial BNC (female)
Dimensions97 x 69 x 26 mm
Weight0.44 lbs.
Related ChassisFCU-RACK16S and FCU-RACK16-AC/DC
Chassis MountableYes
Shock / VibrationIEC60068-2-32, IEC60068-27, IEC60068-6
LED IndicatorsPower, CO Mode, CPE Mode, Link Activity, Speed
Operating Temperature0 to 50°C
Storage Temperature-10 to 70°C
Humidity5 to 90% non-condensing
CertificationsFCC Part 15 Class A, CE
Warranty2 Years
Download NameFile Size
EVC-3010 Datasheet398.64KB
EVC-3010 User Manual1.39MB
EVC-3010 Phase Out Notice236.97KB