Your shopping cart is empty!
PCTEL’s 8111D-HR GPS High Rejection Magnetic Mount Tracking Antenna is a full GPS band antenna covering GPS L1, GLONASS L1, Galileo E1 and Beidou B1 satellite frequency bands. The proprietary filtering design allows wideband coverage while achieving superior out-of-band rejection. This antenna is ideal for any global GPS tracking application that requires an externally mounted antenna. Using internal magnets or screw mount holes, the antenna can be installed almost anywhere on a vehicle allowing for greater flexibility.
8111D-HR, GPS High Rejection Tracking Antenna with 5 meters Cable
8111D-HR-1M-SMA, Same as above with 1 meter Cable
8111D-HR-3M-SMA, Same as above with 3 meters Cable
Technology | |
Category | Antenna |
Wireless | |
Single / SISO Antennas | GPS |
Pattern | Omnidirectional |
VSWR | ≤1.5:1 (at connector) |
Gain | @ 3.0 VDC: 30 dB (typical) |
Polarization | Right hand circular |
Electrical | |
Impedance | 50 ohms |
Voltage | 2.8-6.0 V (operating), ≤ 12.0 V (survivability) |
Current | 13 mA (typical) |
Mechanical | |
Cabling | 1, 3, or 5-meters highly flexible 174- sized cable |
Connector Type | SMA male |
Dimensions | 1.77 L x 2.01 W x .47 D inches (45 x 51 x 12 mm) |
Weight | 0.26 lbs (120 g) |
Mounting | Magnetic (5 lb lift-off force) or permanent (pre-threaded for 3 x M2.5 screws) |
Shock / Vibration | Vertical axis 50G, other axes 30G |
Color | Black |
Noise Level | < 2.0 dB (typical) |
Material | Lexan EXL9330 |
Ratings | |
Operating Temperature | -40°C to +85°C |
Storage Temperature | -40°C to +85°C |
RoHS Compliant | Yes |
Certifications | IP67 |
Download Name | File Size |
PCTEL Magnet Mount GPS Antenna Series Installation Instructions | 71.93KB |
PCTEL 8111D-HR Datasheet | 332.94KB |
PCTEL 8111D-HR Dimensional Drawings | 227.84KB |