Patton FiberPlex FP101E/SFP/DC Industrial Gigabit SFP Media Converter

Patton FP101E/SFP/DC Industrial Gigabit SFP Media Converter, IP30, wallmount, DIN rail, or Desktop
Model: FP101E/SFP/DC
Availability: In Stock to 4 Weeks *
FREE SHIPPING !
Qty: Add to Cart

Patton FP101E/SFP/DC Industrial Gigabit SFP Media Converter, Single/Multi-Mode

Patton’s FP101E/SFP/DC converts singlemode or multimode fiber to a copper Ethernet signal. The combination of high bandwidth and noise immunity of fiber makes these ideally suited for many applications including IP security cameras, IP speakers, VoIP phones, Wireless Access Points, POS kiosks, BACs, PLCs and more.

Because Ethernet over Cat 5e/6 cables is limited to only 100 meters (328 feet), using fiber as a backhaul allows for a massive increase in distances. SFP options for multimode can reach up to 2 km (1.24 miles) and singlemode options can range as far as 120 km (74 miles). In addition to the reach, you get Fiber’s superior immunity to noise and, harmful transients (surges).

The FP101E/SFP/DC is housed in an IP30 rated DIN rail, wall-mount enabled enclosure and has a wide operating temperature of -40 to 75°C (-40 to 167°F). Its rugged design and wide temperature range makes it an ideal media converter for industrial or harsh environments.

The Fiberplex 101E/SFP/DC is very simple to use, completely plug and play. LEDs will make it clear when power is detected and when data is passing both on the copper and fiber lines.

Key Features

  • Hardened design enclosure
  • 4-pin terminal block, 12–56 VDC power input
  • Supports Link Fault Pass through (LFP) function
  • Supports automatically switch mode and converter mode
  • Provides increased Noise Immunity
  • Wall mount, DIN rail or desktop
  • Meets tough EN60068 standards for Free Fall, Shock and Vibration
  • Plug and Play
Technology
Category Media Converter
Media Converter Type Fiber to Copper
Total Ports 2
Ethernet Ports 1 Gigabit (10/100/1000TX)
Fiber Interface SFP Slot
Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
MAC Table Size 1K
Serial Interface
Flow Control IEEE 802.3x Flow Control and Back Pressure
Power
Power Consumption 3 W @ 48 VDC full load
Connection 4-pin terminal block 12–56 VDC input
Mechanical
Enclosure Metal
Mounting DIN Rail, Wall Mount, Desk Top
Shock / Vibration EN60068-2-27 / EN60068-2-6
Weight 2.5 lbs (1.13 kg)
Dimensions 4.07L x 1.26W x 3.21D inches 103.5L x 32W x 81.5D mm)
Ratings
Operating Temperature -40 to 75°C
Storage Temperature -40 to 85°C
Humidity 5 to 95% non-condensing
Certifications IP30
Warranty 1 year
Download Name File Size
Patton FP101E/SFP/DC Datasheet3.26MB