Bolton Technical BT478546 Portable Signal Unit Powered by Peplink & Cel-Fi

*** DISCONTINUED ***  This product is discontinued. Please see alternate Industrial Wi-Fi Hotspots here.

Bolton Technical BT478546 PSU Commander w/Peplink UBR-LTE & Cel-Fi GO RED Signal Booster

The BT478546 Portable Signal Unit Commander is intelligently designed to provide fast WiFi and reliable LTE for emergency personnel. Using the power of batteries, public safety crews can set up and tear down in minutes. Gone are the days where connectivity uncertainty limited the ability to respond to crises. Everything you need is conveniently packaged in a high-impact, watertight, dust-proof Pelican 1620 Protective Case. The extendable handle and wheels make it easy to haul around. The PSU comes with a Peplink Pepwave UBR LTE Dual Cellular Router AND a Cel-Fi GO RED FirstNet signal booster. When turned on, the signal booster enhances your cell reception, and the router broadcasts reliable WiFi, all over FirstNet bandwidths.

Since the router uses the cellular network to operate, it also benefits from the amplified signal. Performance will be significantly better than what another FirstNet hotspot could provide. Connect multiple wireless devices and up to five wired devices and enjoy a reliable connection with speeds up to 300 Mbps. The dual-SIM feature can help you stay connected without interruptions.

Standard with two M18 lithium batteries, the PSU Commander offers up to 18 hours of operation. Built-in USB ports and a power strip give you the option to keep additional equipment on. The LED voltage meter allows for easy battery power tracking. Use the plug socket to power the unit when electricity is available. The PSU can be used literally anywhere a sliver of cell signal is available such venues, warehouses, arenas, multi-storied apartments or offices.

The BT478546 PSU Commander is water-resistant when closed. Since the case has to remain open during operation, place the unit in a secure spot when using it outside. This will protect it from water, dust, falling objects, and anything that can damage the electrical components. When closed, the Pelican case is rated to withstand a temperature range of -10°F upwards to 210°F (-23.3° to 98.9°C). It may not survive a long time in a blaze, but it’s fire retardant if not completely fireproof.

Components and Key Features of the BT478546

The portable unit is easy to set up and use, you'll be good to go in minutes. Enable your BT478546 Commander with a SIM card and cost-effective data plan to ensure your PSU is ready to deploy. The system includes the Peplink UBR-LTE cellular router, Cel-Fi GO RED Signal Booster, high-performance antennas, a rugged carrying case, internal cabling, and power. Use the plug socket to power the unit when electricity is available.

Cel-Fi GO RED Portable FirstNet Signal Booster

• FirstNet Bands: 12 and 14
• Gain: 100 decibels (dB)
• Impedance: 50 Ohm
• Input Power: 9.6 - 16.5V
• Antenna Ports: 699 - 798 MHz
• Power: 16W

Peplink UBR-LTE CAT 6 Router

• WAN Interface: 1x GE, 2X LTE Modems
• Port Speeds: 1 Gbps
• Data Speeds: DL 300 Mbps, UL 150 Mbps
• SIM Capabilities: Dual
• Antennas: 4x LTE Whip, 2x WiFi Whip, 1 GPS

Rugged Carrying Case

• Pelican 1620 protective case
• Extendable handle and wheels
• High-Impact, dust-proof, watertight
• 2x Rechargeable Batteries
• 1 Ft. Jumper Cable, N-Connectors
• Right Angle Connector, N-Connectors
• 50 Ft. LMR 400 Cable
• 50 Ohm Indoor Panel Antenna
• 50 Ohm Outdoor Yagi Antenna
• 7 Ft. Extendable Tripod, Quick Connect

Contact Us About Data Plans

Enable your BT478546 with a cost-effective data plan to ensure your PSU is ready to deploy. To enable cellular connectivity, at least one activated SIM card with an active cellular data plan is needed. Call Westward Sales for information.