WoMaster DP101 Industrial 1-port Fiber Media Converter, 90W PoE 802.3bt /PSE
The DP101 is an industrial grade fiber optic media converter featuring the advanced function of 90W PoE/PSE. To increase communication distance, it provides 10/100BaseT(X) Ethernet and 100BaseFX (SC and ST types) fiber connectors. It supports bi-directional link loss forwarding for real-time far end link fault alert and bi-directional auto-recovery functions. The PoE feature complies with standards IEEE 802.3af/at/bt and non-standard PD devices. Through the smart detect algorithm, the DP101 will automatically supply power through 2/4 pairs of wires, or limited feeding power for non-standard PDs.
Wide operating temperature and high power feed to warm outdoor equipment at extreme low temperatures. Because of its compact size (30mm W x 103mm H x 82mm D) the DP101 requires minimal space and allows for easy cable reorganization.
Key Features
Ethernet Media Converter- Converts Optical Signal and Ethernet Electrical Signal
- Supports IEEE 802.3 100Base-FX, 100Mbps Fast Ethernet Optical Fiber
- Supports IEEE 802.3 10/100Base-TX ,10/100Mbps Fast Ethernet
Link Loss Forwarding- Bi-Directional Link Loss Forwarding for Real Time Far-
End Link Fault Alert - Bi-Directional Auto Recovery for Ethernet Optical
Fiber and Ethernet RJ-45 Communication
Dual Forwarding Modes- Pure Converter: Low Packet Forwarding Latency - 1.6x10-6 Sec
- Ethernet Switch Store-and-Forward: TX 10/100Mbps Auto-Negotiation, Auto MDI/MDI-X, IEEE 802.3x Flow-Control & Back- Pressure, CRC Error Packet Filtering
Standard Compliance- IEC 61000-6-2/ IEC 61000-6-4 Heavy Industrial EMC
- EN50121-4 Railway Track Side EMC
- High Level Electro Magnetic Susceptibility – Level 3
| Smart PoE Capability- Auto PD Type Recognize- Standard or Non-Standard
- Auto Apply Limited Power for Non-Standard PD
- Built-in Over-Current, Cable Short Protections for Non-Standard PD
Hardened System Design- Survive Under -40° to 75°C environment
- Wide Range Redundant Power Input
- Ingress Protection – IP40
Easy System Configuration- DIP-Switch Configuration: Forwarding Mode / TX Speed / Link Loss Forwarding /PoE Setting
- TX Forced 100Mbps Full-Duplex
- Switch Store and Forwarding Mode support TX Speed Auto Negotiation and Auto MDI-X
Special Vertical Market Application- Factory Automation - Real-time Machine Communication
- Railway Track Side - PLC Communication
- Telecom Unattended Station - Ethernet / Fiber Conversion
|
Configurations
DP101-M-SC-2, Industrial Fiber Media Converter, multi mode, 2km
DP101-S-SC-30, Industrial Fiber Media Converter, single mode, 30km
